EXPERIMENTAL STUDY ON STRENGTH OF FIBER REINFORCED POLYMER HOLLOW RECTANGULAR STRUCTURAL MEMBERS
نویسندگان
چکیده
منابع مشابه
Shear Strength of Fiber-Reinforced Clayey Sands
Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...
متن کاملExperimental Testing of Polymer Reinforced with Coconut Coir Fiber Composites
Reinforced polymer composites have played an ascendant role in a variety of applications for their high meticulous strength and modulus the fiber may be synthetic or natural used to serves as reinforcement in reinforced composites. Glass and other synthetic fiber reinforced composites consists high meticulous strength but their fields of applications are restrained because of their high cost of...
متن کاملExperimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature
This study investigated the effects of high temperature exposure on the compressive, tensile, and flexural strengths of concrete containing glass fiber. A total of 108 cubic specimens (150 mm × 150 mm × 150 mm), cylindrical specimens (300 mm × 150 mm), and prismatic specimens (500 mm × 150 mm × 150 mm) were prepared for compressive, tensile, and flexural strength testing, respectively. The spec...
متن کاملNatural Composite Reinforced by Lontar (Borassus flabellifer) Fiber: An Experimental Study on Open-Hole Tensile Strength
A research has been conducted in the present study to investigate the effect of hole configuration on tensile strength of lontar fiber-reinforced composites. The lontar fiber-reinforced composites used in this study were produced by hand lay-up process. The lontar fiber-reinforced composites consist of short random fiber of 5 cm that contains 32% of nominal fiber volume as the reinforcement and...
متن کاملIn Vitro Study of Transverse Strength of Fiber Reinforced Composites
OBJECTIVE Reinforcement with fiber is an effective method for considerable improvement in flexural properties of indirect composite resin restorations. The aim of this in-vitro study was to compare the transverse strength of composite resin bars reinforced with pre-impregnated and non-impregnated fibers. MATERIALS AND METHODS Thirty six bar type composite resin specimens (3×2×25 mm) were cons...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshu
سال: 2002
ISSN: 0289-7806,1882-7187
DOI: 10.2208/jscej.2002.710_449