Experimental Study on Spot Weld and Plug Weld of Automotive Body Panel
نویسندگان
چکیده
منابع مشابه
Spot Weld Analysis With 2D Ultrasonic Arrays
This paper describes a threefold method of testing the performance of an array-based ultrasonic tool for nondestructive testing of spot welds. The tool is described in its capabilities, use, and advantages over existing counterparts. Performance testing for and the results from carrying out the testing are described. The three performance testing methods include 1) the use of calibrated samples...
متن کاملAnalysis of Resistance Spot Welding Process Parameters Effect on the Weld Quality of Three-steel Sheets Used in Automotive Industry: Experimental and Finite Element Simulation
In the present research, the effects of spot-welding process parameters on the nugget diameter and electrode penetration depth of spot-welded joints were investigated. To achieve this, a spot-welded joint of three-thin sheet low carbon steels (same thicknesses of 0.8 mm) was simulated as an electerical-thermal-mechanical coupling of 3D finite element model. After validating the finite element s...
متن کاملCase Study: Weld Microstructures
The microstructure obtained as the weld cools from the liquid phase to ambient temperature is called the as–deposited or primary microstructure. Its major components include allotriomorphic ferrite, Widmanstätten ferrite, and acicular ferrite (Fig. 1). There may also be some martensite, retained austenite or degenerate pearlite. These latter phases occur in very small fractions, and are known b...
متن کاملStudy of Effect of Parameters on Resistance Spot Weld of Ass316 Material
The objective of this work is to study the effect of parameters on resistance spot weld of ASS316 material. In order to study the significance of the process parameters i.e. current, electrode force and weld cycles, towards the percentage improvement in material hardness. It is clear from the results that parameters significantly affect both the mean and the variation in the percentage improvem...
متن کاملSpot Weld Analysis with Two-Dimensional Ultrasonic Arrays
This paper describes a threefold method of testing the performance of an array-based ultrasonic tool for nondestructive testing of spot welds. The tool is described in its capabilities, use, and advantages over existing counterparts. Performance testing is not only described, but results from carrying out the testing are documented as well. The three performance testing methods include the use ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Korean Society of Automotive Engineers
سال: 2016
ISSN: 1225-6382
DOI: 10.7467/ksae.2016.24.6.709