Experimental Study on Shear Behavior and Failure Mechanism of Bolted Heterogeneous Rock Joints under Different Anchorage Conditions

Microscopic experimental investigation on shear failure of solder joints

A microscopic investigation has been made on the shearing of one leaded and two leadfree solders by using an in situ SEM method. A shear lap joint specimen is designed and fabricated to accommodate a thin layer of solder alloy between copper strips. A non-contact method that measures strains in a very narrow area in the solder was applied. A laser grid was also used on the copper strip for meas...

A review on stress distribution, strength and failure of bolted ‎composite joints

In this study, analytical models considering different material and geometry for ‎both single and double-lap bolted joints were reviewed for better understand how to ‎select the proper model for a particular application. The survey indicades that the ‎analytic models selected for the adhesively single or double bolted lap joints, as well ‎as T, scarf, and stepped joints, with linear material pr...

Laboratory Study of the Shear Behaviour of Natural Rough Rock Joints Infilled by Different Soils

Natural rock joints infilled with soil materials may show a reduced shear strength, which influences rock mass stability. The aim of this paper is to experimentally investigate the shear behaviour of infilled rock joints, taking into account joint surface characteristics and the properties of the joint and infill materials. A new model for predicting the shear strength of infilled joints is pre...

Rock Stability under Different Fluid Flow Conditions

Study on the shear strength degradation of ACA joints induced by different hygrothermal aging conditions

Article history: Received 13 June 2012 Received in revised form 1 June 2013 Accepted 15 June 2013 Available online 17 July 2013 The effect of the different hygrothermal conditions on the shear strength degradation of ACA joints and the difference among them are studied in this paper using experiments and numerical simulations. First of all, several hygrothermal aging tests with different accele...