Experimental study on recoverable thermal energy from low thermal inertia exhaust heat recovery unit

A Numerical Study on Using Air Cooler Heat Exchanger for Low Grade Energy Recovery from Exhaust Flue Gas in Natural Gas Pressure Reduction Stations

Heat EXchangers (HEX) that are used in City Gate Station (CGS) systems are modeled numerically to recover the exhaust waste heat. It was tried to find the best viscous model to obtain results in accordance with experimental results and to change the heat exchanger design. This HEX is used for recovering heat from exhaust flue gas with a mixture of 40% water and 60% ethylene glycol as the coolin...

Experimental and Numerical Investigations on Al2O3–Tricosane Based Heat Pipe Thermal Energy Storage

The enhancement of operating life cycle of electronic devices necessitates the development of efficient cooling techniques. Therefore, in the present work the effects of employment of Phase Change Material, in the adiabatic section of heat pipe for electronic cooling applications were experimentally and numerically investigated. Tricosane (100 ml) is chosen as PCM in this study, where Al2O3 nan...

a study on corrosion reasons of heat exchanger in ammonia unit

چکیده ندارد.

High-resolution thermal inertia derived from the Thermal Emission Imaging System (THEMIS): Thermal model and applications

[1] Thermal inertia values at 100 m per pixel are determined using nighttime temperature data from the Thermal Emission Imaging System (THEMIS) on the Mars Odyssey spacecraft, producing the highest-resolution thermal inertia data set to date. THEMIS thermal inertia values have an overall accuracy of 20%, a precision of 10–15%, and are consistent with both Thermal Emission Spectrometer orbital a...

Energy Recovery Study for Polyethylene and Cotton by Thermal Plasma Degradation