Experimental Study on R245fa Condensation Heat Transfer in Horizontal Smooth Tube and Enhanced Tube

Experimental and Theoretical Study on Condensation Heat Transfer of Nonazeotropic Refrigerant Mixtures R1234yf/R32 Inside a Horizontal Smooth Tube

The condensation heat transfer characteristics of nonazeotropic mixtures R1234yf and R32 (mass fractions of 0.52:0.48 and 0.77:0.23, respectively) inside a horizontal smooth tube (inner diameter 4 mm) were experimentally studied at mass fluxes ranging from 100 to 300 kg/m s. A prediction model for the forced convective condensation heat transfer characteristics of nonazeotropic refrigerant mixt...

Condensation Heat Transfer Coefficients of HFC245fa on a Horizontal Plain Tube

In this study, condensation heat transfer coefficients (HTCs) of HCFC22, HCFC123, HFC134a and HFC245fa are measured on a horizontal plain tube 19.0 mm outside diameter. All data are taken at the vapor temperature of 39 with a wall subcooling temperature 3-8 . Test results show the HTCs of newly developed alternative low vapor pressure refrigerant, HFC245fa, on a smooth tube are 9.5% higher than...

Experimental Investigation on Evaporation Heat Transfer and Pressure Drop Characteristics of HFC-161 in a Horizontal Smooth Tube

The evaporation heat transfer and pressure drop characteristics of HFC-161 in a horizontal smooth tube with an inside diameter of 9 mm was experimentally investigated. The local heat transfer coefficient and total pressure drop were measured at the heat flux ranging from 15 – 25 kW/m, the mass flux ranging from 100 – 200 kg/(m·s), and the evaporation temperature of 5, 10 °C. The experimental re...

Saturated Flow Boiling Heat Transfer in Horizontal Square Tube

Experimental Study of Heat Transfer Rate in a Shell and Tube Heat Exchanger with Air Bubble Injection (TECHNICAL NOTE)

Shell and tube heat exchangers are widely being used in many of industrial and power engineering applications. Different techniques have been employed in order to enhance the performance of the heat exchanger. Air bubble injection is one method to increase the turbulence of the flowing fluids which in turn enhance the heat transfer performance. Injecting air bubbles is one of the promising tech...