EXPERIMENTAL STUDY ON PROPERTIES OF SHEAR WALL USING STEEL FIBER REINFORCED CONCRETE UNDER IN-PLANE LATERAL FORCE

نویسندگان

چکیده

In-plane lateral loading tests were conducted to investigate the structural performance of SFRC shear walls. The test results revealed that steel fiber reinforcement mitigated damage walls and enhanced their capacity. number cracks on at an interstory-drift angle 1/200 was twice as significant RC wall, maximum residual crack widths approximately half. Shear stiffness degradation after cracking reduced steel-fiber volume ratio increased. 0.5% 1.0% ratios increased capacities by 11% 17%, respectively.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Seismic Performance of Steel Plate-Reinforced Concrete Composite Shear Wall

In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...

متن کامل

Some Studies on Steel Fiber Reinforced Concrete

Fibres are generally used as resistance of cracking and strengthening of concrete. In this project, I am going to carry out test on steel fibre reinforced concrete to check the influence of fibres on flexural strength of concrete. According to various research papers, it has been found that steel fibres give the maximum strength in comparison to glass and polypropylene fibres. Hence, in this pr...

متن کامل

Study Punching Shear of Steel Fiber Reinforced Self Compacting Concrete Slabs by Nonlinear Analysis

This paper deals with behavior and capacity of punching shear force for flat slabs produced from steel fiber reinforced self compacting concrete (SFRSCC) by application nonlinear finite element method. Nonlinear finite element analysis on nine slab specimens was achieved by using ANSYS software. A general description of the finite element method, theoretical modeling of concrete and reinforceme...

متن کامل

Comparative Study of Steel and Glass Fiber Reinforced Concrete Composites

Concrete is most widely used construction material in the world. Fiber reinforced concrete (FRC) is a concrete in which small and discontinuous fibers are dispersed uniformly. The fibers used in FRC may be of different materials like steel, G.I., carbon, glass, aramid, asbestos, polypropylene, jute etc. The addition of these fibers into concrete mass can dramatically increase the compressive st...

متن کامل

Stepwise Regression for shear capacity assessment of steel fiber reinforced concrete beams

The addition of steel fibers into concrete improves the postcracking tensile strength of hardened concrete and hence significantly enhances the shear strength of reinforced concrete reinforced concrete beams. However, developing an accurate model for predicting the shear strength of steel fiber reinforced concrete (SFRC) beams is a challenging task as there are several parameters such as the co...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Nihon Kenchiku Gakkai ko?zo?-kei ronbunshu?

سال: 2023

ISSN: ['1881-8153', '1340-4202']

DOI: https://doi.org/10.3130/aijs.88.984