Experimental study on optimal spray parameters of piezoelectric atomizer based spray cooling
نویسندگان
چکیده
منابع مشابه
Theoretical and experimental study of the effects of spray inclination on two-phase spray cooling and critical heat flux
Experiments were conducted with PF-5052 liquid sprays impacting a 1.0 1.0 cm heated test surface at different inclination angles, flow rates, and subcoolings. Inclination angle had no noticeable effect on the single-phase or two-phase regions of the boiling curve. Maximum CHF was always achieved with the spray impinging normal to the test surface; increasing angle of inclination away from the n...
متن کاملDynamic Behavior of Cryogen Spray Cooling: Effect of Spray Distance
Cryogen spray cooling (CSC) is used to minimize the risk of epidermal damage during laser dermatologic surgery. During CSC, skin surface is cooled by a short spurt of refrigerant R134a with boiling point of –26.2 C. Since R134a is volatile in open atmospheric conditions, the atomized liquid droplets undergo continuous evaporation as they fly in air, leading to a lost momentum and mass. Therefor...
متن کاملSimulation and Control of Spray Drying Using Nozzle Atomizer Spray Dryer
Spray drying is a commonly used method of drying a liquid feed through a hot gas. This study aims to obtain the empirical model of the spray drying process of full cream milk using a nozzle atomizer spray dryer, Lab-Plant SD 05 Laboratory Scale Spray Dryer. Inlet air temperature was chosen as the manipulated variable and outlet air temperature was the controlled variable. No disturbance was con...
متن کاملInkjet Assisted Spray Cooling of Electronics
Increases in microprocessor power dissipation and the resulting effect on the cost and complexity of thermal management solutions has been well documented in recent years. Accompanying this increase in overall power dissipation has been a reduction in feature size due to process improvements resulting in a steady decrease in the size of the processing core where most of the power on a die is ge...
متن کاملNumerical characterization of multi-nozzle spray cooling
This work aims to study the characteristics of multi-nozzle spray cooling using CFD method based on the fundamentals of air flow and liquid droplet collision dynamics. A mathematical model for the two-phase flow was presented. The simulations were performed using a EulerianeLagrangian approach. Focus was placed on revealing the flow behavior with multiple nozzles, the droplet trajectory, and th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Heat and Mass Transfer
سال: 2016
ISSN: 0017-9310
DOI: 10.1016/j.ijheatmasstransfer.2016.07.037