EXPERIMENTAL STUDY ON LOAD CARRYING CAPACITY OF COMPOSITE HYBRID STEEL BOX GIRDER WITH RC/SW SLAB USING HIGH PERFORMANCE STEEL
نویسندگان
چکیده
منابع مشابه
Experimental and Numerical Investigation on Bending Capacity of Steel- concrete Composite Truss Girder
This article presents an experimental investigation on the bending capacity of steel-concrete composite truss girder (SCCTG). Four full-scale specimens named CB1, CB2a, CB2b and CB3 respectively, are tested and numerical analyzed. Stress distribution, load-displacement relationship, load-slip relationship and ultimate bending capacity of SCCTGs are investigated. The results show that SCCTG foll...
متن کاملTheoretical and Experimental Study on Natural Frequency of Externally Prestressed Box-Girder with Corrugated Steel Webs
Abstract: Based on the characteristics of box girder with corrugated steel webs, the existing prestressing force, the effect of shear deformation of composite girder on the deflection, “folding effect” in longitudinal direction of corrugate steel webs and the arrangement of external tendons were considered comprehensively. With the experiment results of five literatures integrated, N/fcA (the a...
متن کاملAerodynamic Admittance Research on Wide-body Flat Steel Box Girder
Abstract: Aerodynamic admittance is a key parameter affecting the analysis accuracy of the bridge buffeting response. However, few articles have covered the issue of the wide-body flat box girder with much smaller depth-width ratio (such as 1/12 studied in this paper). Therefore, to explore the real buffeting force of the wide-body flat box girder, experiments of the static force coefficients a...
متن کاملLoad Test and Model Calibration of a Horizontally Curved Steel Box-Girder Bridge
In this paper, full scale load test of a horizontally curved steel box-girder bridge is carried out in order to detect structural defects, which reportedly result in unwanted vibrations in nearby buildings. The bridge is tested under the passage of six heavy vehicles at different speeds, so as to determine its static and dynamic responses. A total number of one hundred and two (102) sensors are...
متن کاملComposite Action during Construction of Steel Trapezoidal Box Girder Bridges (0-1898-2)
In steel trapezoidal box girder bridge systems, the U-shaped steel girder is designed to act compositely with the concrete deck to form a closed box for live loading. During the construction stage, however, the behavior is not well understood. The usual practice of assuming the system to be non-composite during construction requires substantial top flange bracing to form a quasi-closed box sect...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshuu A
سال: 2006
ISSN: 1880-6023
DOI: 10.2208/jsceja.62.643