EXPERIMENTAL STUDY ON LATERAL-TORSIONAL BUCKLING OF TRUSS BEAM-COLUMNS WITH CIRCULAR TUBE SECTIONS
نویسندگان
چکیده
منابع مشابه
Buckling optimization of elastic IPE and circular sections columns considering boundry condition effects
Abstract: The theory of optimization has improved remarkably during the last four decades. The main part of optimizing investigations has been focused on enhancing buckling resistance which does not violate the economic feasibility of final design. The finite element analysis which is called ESO (Evolutionary Structural Optimization) is presented for optimum (or most ideal) design of c...
متن کاملThe effect of discrete lateral and torsional bracings stiffness on the elastic lateral-torsional buckling of mono-symmetric I beam, under the concentrated moment
When the out-of-plane stiffness of a beam is remarkably lower than the in-plane stiffness, the lateral-torsional buckling occurs. In this study, the behavior of mono-symmetric I-beams with discrete torsional and lateral bracings under the concentrated moment is investigated using the finite element analyses. Then, based on the numerical analyses, equation for the stiffness requirement is propos...
متن کاملAn Experimental Study on Seismic Performance of Steel Truss Coupling Beams with Buckling-restrained Brace
Through the pseudo-static test on the steel truss coupling beams with buckling-restrained brace, the bearing capacity, deformation capacity, hysteresis curve, skeleton curve, ductility, Energy Dissipation and stiffness degradation of such coupling beam are understood. The test results show that the steel truss coupling beams with buckling-restrained brace is characterized by bigger bearing capa...
متن کاملDetermination of Buckling Loads from Triaxial Load Tests of Slender Concrete-filled Tube Beam-columns
This paper briefly describes efforts at determining buckling loads of slender concrete-filled tube beam-columns. Although utilizing state-of-the-art equipment and controllers, unexpected difficulties were encountered on extracting buckling loads for the specimens due to (a) frictional forces in the actuators, (b) large initial bidirectional imperfections, (c) initial stresses due to constructio...
متن کاملSimplified Approach for Torsional Analysis of Non-homogenous Tubes with Non-circular Cross-sections
In this paper a method is presented for torsional analysis of non-homogeneous tubes with arbitrarily shaped cross-sections. A previously presented method based on Bredt’s theory is extended to achieve formulas for torsional analysis. Shear modulus varies through the thickness according to a power law distribution. To validate the accuracy of the presented formulas for angle of twist and shear s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 1986
ISSN: 0910-8025,2433-0000
DOI: 10.3130/aijsx.363.0_12