EXPERIMENTAL STUDY ON FULL-SCALE STEEL-REINFORCED CONCRETE BEAM-TO-COLUMN CONNECTIONS
نویسندگان
چکیده
منابع مشابه
Full Scale Reinforced Concrete Beam-Column Joints Strengthened with Steel Reinforced Polymer Systems
This paper presents the results of an experimental campaign performed at the Laboratory of Materials and Structural Testing of the University of Salerno (Italy) in order to investigate the seismic performance of reinforced concrete (RC) beam-column joints strengthened with steel reinforced polymer (SRP) systems. With the aim to represent typical façade frames’ beam-column subassemblies found in...
متن کاملExperimental and Analytical Study on Reinforced Concrete Deep Beam
ABSTRACT: Several reinforced concrete deep beams with different L/D ratios (1.5, 1.6, 1.71) were cast and tested in order to investigate the strain distribution pattern at mid-section of the beam. This paper describes analysis of deep beams subjected to two point loading with three different L/D ratios (1.5, 1.6, 1.71) using Non-linear Finite element method (ANSYS 9.0 software). In ANSYS 9.0 so...
متن کاملExperimental Study on Full-Scale Beams Made by Reinforced Alkali Activated Concrete Undergoing Flexure
Alkali Activated Concrete (AAC) is an alternative kind of concrete that uses fly ash as a total replacement of Portland cement. Fly ash combined with alkaline solution and cured at high temperature reacts to form a binder. Four point bending tests on two full scale beams made with AAC are described in this paper. Companion small material specimens were also casted with the aim of properly chara...
متن کاملPerformance-based Optimization of Strut-and-tie Models in Reinforced Concrete Beam-column Connections
This paper presents the performance-based optimization of strut-and-tie models in reinforced concrete beam-column connections. The performance-based optimization (PBO) technique is employed to investigate optimal strut-and-tie models in reinforced concrete beam-column connections. Developing strut-and-tie models in reinforced concrete beam-column connections is treated as a topology optimizatio...
متن کاملThe Behavior of Type of RC Column-to-Steel Beam Connections and Scrutiny Of Behavior Coefficients
(RCS) frames which are systems that dwell of concrete columns and steel beams , by optimizing the act of compressive strength of concrete and bending strength of steel due to not only a decrease in building weight in comparison to concrete structures but also having a better action in long spans frames . In this paper for analysis RCS behavior, a category of nonlinear Push Over analyses were ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Architectural Institute of Japan
سال: 1963
ISSN: 0387-1185,2433-0027
DOI: 10.3130/aijsaxx.82.0_23