Experimental Study on Electrode Wear of Diamond-Nickel Coated Electrode in EDM Small Hole Machining
نویسندگان
چکیده
منابع مشابه
An Experimental Study of Surface Roughness of H11 Steel in Edm Process Using Copper Tool Electrode
In this study, the effect of input parameters of Electro Discharge Machining (EDM) process including polarity, peak current, pulse on time, duty cycle, gap voltage and concentration of abrasives powder in dielectric fluid on surface roughness are experimentally investigated. A L18 Taguchi’s standard orthogonal array is used for experimental design. Copper is used as tool electrode to machine H1...
متن کاملPotential of Electrically Conductive Chemical Vapor Deposited Diamond as an Electrode for Micro-Electrical Discharge Machining in Oil and Water
Low electrode wear is the key to achieving high finish and high accuracy machining in micro-electrical discharge machining (micro-EDM). Electrically conductive chemical vapor deposited (CVD) diamond has shown almost zero electrode wear, even at short pulse durations, which is extremely important for maintaining the electrode shape throughout the EDM process. This research involves an investigat...
متن کاملManufacturing of Micro V-groove with an Electrically Conductive Diamond Electrode in Edm
INTRODUCTION In order to realize successful fine and precise EDM, it is important to minimize the wear of the electrode under the condition of very small pulse duration. To cope with this issue, the authors focused attention on the electrically conductive CVD diamond (EC-CVD diamond here after) having very high thermal conductivity, and have already shown that an extremely low wear machining co...
متن کاملPerformance of Electrically Conductive Cvd Diamond as an Electrode for Edm
The reduction of electrode wear is very important for high finish and high accuracy machining in microEDM. Electrically conductive CVD diamond has shown almost zero electrode wear, even at short pulse duration of 3μs, which is extremely important for maintaining the desired shape. This research involves an investigation into the EDM performance of the electrically conductive CVD diamond with re...
متن کاملInfluence of Process Parameters and Electrode Shape Configuration On Material Removal Rate, Surface Roughness And Electrode Wear In Die Sinking EDM: A Review
Electrical discharge machining (EDM) is a non conventional manufacturing process which is used for shaping hard metals and forming deep complex shaped profiles by arc erosion in all kinds of electro-conductive materials. The objective of this paper is to study the influence of process parameters and electrode shape configuration on the machining characteristics such as surface quality, material...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2019
ISSN: 1687-8434,1687-8442
DOI: 10.1155/2019/7181237