Experimental Study on Electrochemical Softening for Cooling Circulating Water in Converter Station
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Investigating the Bio-corrosion Inhibition Effect of Enzymes in Circulating Cooling Water System
To avoid the secondary pollution that inorganic corrosion inhibitor may cause in circulating cooling water, the bio-corrosion inhibition effect of lysozyme, catalase, lipase, and laccase, as the biologic inhibitors without the above problem, and the increased bio-corrosion inhibition effect of Ca+2 and Mg+2 are studied. An enzyme with corrosion properties was selected by rotary coupon test. The...
متن کاملCooling water for
ions from rivers will decrease in the coming decades, unless there is widespread uptake of carbon dioxide capture and storage (CCS). CCS may prove to be essential if the UK is to achieve its carbon dioxide and greenhouse gas emission targets. ‘Decarbonisation’ strategies that rely on CCS are therefore potentially at risk of not having sufficient cooling water in periods of low river flows. In t...
متن کاملOutbreak of legionnaires' disease from a cooling water system in a power station.
In September and October 1981 six cases of pneumonia occurred among men working in a power station under construction. Three were identified as cases of legionella pneumonia and two others had serology suggestive of legionella infection. In a sample of 92 men from the site 10 had low levels of antibodies to legionella; a similar sample of men working on an adjacent site showed none with positiv...
متن کاملAnalytical and Experimental Study of Electrochemical Micromilling
Electrochemical micromachining (ECMM) is a non-conventional manufacturing method suitable for the production of microsized components on a wide range of conductive materials. ECMM improves dimensional accuracy and simplifies tool design for machining hard, high strength, heat resistant, and conductive materials into complex shapes. Extremely small interelectrode gaps of the order of few microns...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S Web of Conferences
سال: 2021
ISSN: 2267-1242
DOI: 10.1051/e3sconf/202126102037