Experimental Study on Early Polymer Injection Timing of Heavy Oil Reservoir in Bohai Sea
نویسندگان
چکیده
The polymer flooding of ordinary heavy oil reservoirs in Bohai Sea can improve the crude recovery by advancing injection time flooding. better is, higher enhanced and greater income is. Based on Oilfield, application system was characterized laboratory, then experiments were carried out at different times using one-dimensional core model. results show that: 1) AP-P4 establish good mobility control ability (RF=107, RRF=28.5) under target reservoir conditions; 2) Under experimental conditions, best for is to switch after 0.203PV water injection, be increased 27.73%. Early technology very beneficial offshore fields.
منابع مشابه
An Experimental Study of CO2-low Salinity Water Alternating Gas Injection in Sandstone Heavy Oil Reservoirs
Several studies have shown that oil recovery significantly increased by low salinity water flooding (LSWF) in sandstones. However, mechanism of oil recovery improvement is still controversial. CO2 that develops buffer in presence of water is expected as a deterrent factor in LSWF efficiency based on mechanism of IFT reduction due to pH uprising. No bright evidence in literature suppo...
متن کاملSuperheated steam injection in North Кенкияк shallow heavy oil reservoir
This paper presents an integrated study on the superheated steam injection in the North Кенкияк Field, Kazakhstan. The methodologies cover investigation of mechanisms of superheated steam in recovery, lab experiment, and numerical simulation. The study indicates that the injection of superheated steam can cause rock wettability conversion which is favorable to recovery. The higher the heat enth...
متن کاملAn Experimental Study of Surfactant Alternating CO2 Injection for Enhanced Oil Recovery of Carbonated Reservoir
Core flooding experiments were conducted with the objective of evaluating near miscible surfactant alternating CO2 injection and the effect of surfactant concentrations on gas-oil and water displacements in porous media. The core samples were provided from a low permeability mixed wet oil reservoir at 156 °F and 1900 psia. In addition, very few studies of surfactant adsorption on car...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Basic and Applied Sciences
سال: 2022
ISSN: ['1927-5129']
DOI: https://doi.org/10.29169/1927-5129.2022.18.14