Experimental Study on Buckling Restrained Knee Bracing Systems Using Bolted Channel Sections
نویسندگان
چکیده
منابع مشابه
Effect of the Height Increasing on Steel Buildings Retrofitted by Buckling Restrained Bracing Systems and TTD Damper
The Behavior of conventional braced frames, are not the same in tension and compression. This problem can be improved by prevention of buckling under compressive loads, which is called buckling restrained brace(BRB). In this field TTD metal damper also have much attention due to simplicity in construction and execution. This damper is recommended because of accessing to better performance than ...
متن کاملSeismic Retrofitting of Steel Frames with Buckling Restrained and Ordinary Concentrically Bracing Systems with Various Strain Hardening and Slenderness Ratios
The present study assesses the seismic performance of steel moment resisting frames (SMFs) retrofitted with different bracing systems. Two structural configurations were utilized: ordinary concentrically braces (OCBFs), buckling-restrained braces (BRBFs). A 7-story and 18-story steel perimeter SMFs were designed with insufficient lateral stiffness to satisfy code drift limitations in high seism...
متن کاملAn Experimental Study on Seismic Performance of Steel Truss Coupling Beams with Buckling-restrained Brace
Through the pseudo-static test on the steel truss coupling beams with buckling-restrained brace, the bearing capacity, deformation capacity, hysteresis curve, skeleton curve, ductility, Energy Dissipation and stiffness degradation of such coupling beam are understood. The test results show that the steel truss coupling beams with buckling-restrained brace is characterized by bigger bearing capa...
متن کاملseismic retrofitting of steel frames with buckling restrained and ordinary concentrically bracing systems with various strain hardening and slenderness ratios
the present study assesses the seismic performance of steel moment resisting frames (smfs) retrofitted with different bracing systems. two structural configurations were utilized: ordinary concentrically braces (ocbfs), buckling-restrained braces (brbfs). a 7-story and 18-story steel perimeter smfs were designed with insufficient lateral stiffness to satisfy code drift limitations in high seism...
متن کاملComparative Study on Distortional Buckling Strength of Cold-Formed Steel Lipped Channel Sections
Usage of cold formed steel structural components for buildings and structures is gaining popularity in India for a decade. Hot rolled steel member behaviour and design are well developed, whereas the cold formed steel member behaviour and design is not developed fully compared to the rest of the world. The Indian code for cold-formed steel design, IS 801 was revised during 1975, which is in lin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Earthquake Engineering Society of Korea
سال: 2009
ISSN: 1226-525X
DOI: 10.5000/eesk.2009.13.2.037