Experimental Study on Assembled Monolithic Concrete Shear Walls Built with Precast Two-Way Hollow Slabs
نویسندگان
چکیده
منابع مشابه
Experimental Study on Precast Concrete Shear Walls with Different Hollow Slabs
To study mechanical behaviors of shear walls built with precast two-way hollow slabs, two shear walls with different details of hollow slabs were quasi-statically tested under low cyclic loading. The failure mode was analyzed, which vertical macro-cracks appeared on walls due to the details of hollow slabs. Brittle shear failure can be avoided in terms of the failure behaviors evolved from inte...
متن کاملExperimental Study on Shear Behavior of Mid-rise Assembled Monolithic Concrete Shear Walls with Varying Axial Compression Ratio
The result showed that the brittle failure was extinct, and the new-type shear walls had good deformability whose ductility factors were over 4.3. The axial compression ratio had significant influence on the mechanical properties of the new-type shear walls. As the increscent of the axial compression ratio, the shear capacity and initial stiffness were improved, but the energy-dissipating capac...
متن کاملExperimental Study on Flexural Behavior of Precast Concrete Shear Walls with Vertical Joint
متن کامل
Study on Metering Scheme of Seismic Experiment for Shear Wall Built with Precast Hollow Slab
Abstract: Shear deformation is the most principal deformation in the lateral deformation of shear wall built with precast hollow slab which is designed to be strong shearing and weak bending. The special mechanical characteristic of the shear wall is the relative deformation of the concrete on both sides of vertical and inner joint respectively. The study introduces the measuring scheme of shea...
متن کاملSeismic Displacement Demands for Hybrid Precast Concrete Shear Walls
This paper presents an analytical investigation on the peak lateral displacement demands of “hybrid” precast concrete panelized shear wall structures under seismic loading. The hybrid wall structure investigated uses a combination of mild [i.e., Grade 400 (U.S. Grade 60)] steel bars and highstrength unbonded post-tensioning (PT) strands for lateral resistance across horizontal joints. The analy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Open Civil Engineering Journal
سال: 2014
ISSN: 1874-1495
DOI: 10.2174/1874149501408010161