Experimental Study on Anchorage Performance of Steel Bars with FRP Confined Rings
نویسندگان
چکیده
منابع مشابه
Experimental Study on the Mechanical Properties of FRP Bars by Hybridizing with Steel Wires
Many studies on fiber reinforced polymer composite bars, as a substitute for reinforcing bars, have been conducted to solve corrosion of steel in reinforced concrete structures since 1960s’. However, FRP Bars have a lower elastic modulus than steel rebar as a structural component of concrete structures. Material properties with brittleness fracture and low elastic modulus can be improved by com...
متن کاملExperimental Study of the Seismic Performance of L-Shaped Columns with 500 MPa Steel Bars
Based on tests on six L-shaped RC columns with 500 MPa steel bars, the effect of axial compression ratios and stirrup spacing on failure mode, bearing capacity, displacement, and curvature ductility of the specimens is investigated. Test results show that specimens with lower axial load and large stirrup characteristic value (larger than about 0.35) are better at ductility and seismic performan...
متن کاملBehavior of FRP-Confined Concrete-Filled Steel Tube Columns
This paper presents the results of an experimental study into the behavior of concrete-filled steel tube columns confined by fiber-reinforced polymer (FRP). Eleven columns were tested to investigate the effects of the FRP layer number, the thickness of the steel tube and concrete strength on their load capacity and axial deformation capacity. The experimental results indicated that the FRP wrap...
متن کاملEvaluation for Tensile Performance of Recently Developed FRP Hybrid Bars
This paper deals with an experimental study on the tensile performance of recently developed “FRP Hybrid Bars” by authors. The objective of this study is to investigate tensile strength of FRP Hybrid Bars and to overcome the shortcomings of the FRP material with its low elastic modulus. This uses the concept of material hybridization to increase elastic modulus to be used in concrete structures...
متن کاملThe Experimental and Numerical Study of Hexagonal Cutting Of AISI 316L Steel Round Bars
Cutting processes can be used in batch production of polygonal bars with special features. In this paper, a new form of broaching process for cutting of hexagonal bars from raw round bars is discussed. Due to lack of rolled or drawn raw material, the final product is made of AISI 316L stainless steel bars having appropriate initial size. In this method, a fixed die is used as a tool, and by app...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2018
ISSN: 2261-236X
DOI: 10.1051/matecconf/201817501037