Experimental Study of Water Impact Loads on Symmetric and Asymmetric Wedges

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

On Symmetric and Asymmetric Buckling Modes of Functionally Graded Annular Plates under Mechanical and Thermal Loads

In the present article, buckling analysis of functionally graded annular thin and moderately thick plates under mechanical and thermal loads is investigated. The equilibrium and stability equations of the plate are obtained based on both classical and first order shear deformation plate theories. By using an analytical method, the coupled stability equations are converted to independent equatio...

متن کامل

Experimental Study of Discharge Coefficient of Symmetric and Asymmetric Rectangular Labyrinth Weirs

The discharge coefficient of labyrinth weirs increases with increasing the crest length in a certain width range. The present research was carried out in a laboratory flume with a length of 8 m, a width of 0.6 m, and a height of 0.6 m. The discharge coefficient of two-cycle symmetric and asymmetric rectangular labyrinth weirs was experimentally measured. The dimensional analysis by the Buckingh...

متن کامل

Asymmetric impact between liquid and solid wedges

The hydrodynamic problem of impact between a solid wedge and a liquid wedge is analysed. The liquid is assumed to be ideal and incompressible; gravity and surface tension effects are ignored. The flow generated by the impact is assumed to be irrotational and therefore can be described by the velocity potential theory. The solution procedure is based on the analytical derivation of the complexve...

متن کامل

The Effect of Asymmetric Water Entry on the Hydrodynamic Impact

The effect of the asymmetric water entry over a submerged part of a ship on the hydrodynamic impact is investigated numerically. A wedge body is considered to study and the problem is assumed to be two-dimensional. The Results of symmetric and asymmetric impacts are compared together. The effect is found significant in the numerical simulation. The maximum hydrodynamic pressure at a heel angle ...

متن کامل

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Ocean Engineering and Technology

سال: 2014

ISSN: 1225-0767

DOI: 10.5574/ksoe.2014.28.3.209