Experimental Study of Ultralight (<300 kg/m3) Foamed Concrete
نویسندگان
چکیده
منابع مشابه
Fragmentation of foamed silicic melts: an experimental study
We present the first experimental investigation of the fragmentation behavior of twophase (melt+gas) rhyolitic systems under rapid decompression. Two-phase samples have been generated by foaming water-oversaturated rhyolitic melts up to 900°C and up to 18 MPa prior to rapid decompression in a fragmentation bomb. The fragmented particles or experimental pyroclasts were recovered for analysis. Se...
متن کاملExperimental Investigation on Cold-Formed Steel Foamed Concrete Composite Wall under Compression
A series of tests on cold-formed steel foamed concrete (CSFC) composite walls subjected to axial load were proposed. The primary purpose of the experiments was to study the mechanical behavior and identify the failure modes of CSFC composite walls. Two main factors were considered in this study: 1) specimen with pouring foamed concrete or without and 2) different foamed concrete density ranks (...
متن کاملExperimental study on foamed sandy soil for EPBM tunnelling
Foam injection is becoming a standard conditioning agent when tunnelling with an earth-pressure balanced shield, resulting in an increasing interest in this technique. The technique is mostly based on empirical rules and experience. To be able to determine what foam and how may foam has to be injected for different soils, it is necessary to know the mechanical parameters of the foam-water-soil ...
متن کاملExperimental Study of Crumb Rubber in Concrete
Crumb rubber is a material produced by shredding and commutating used tires. Waste tire dumping, disposal of these materials or burning these tires cause serious health and environmental problems. On the other side the traffic intensity also increasing day by day and thus bearing capacities also increased the long term goal of the work is to find a means to dispose of the crumb rubber in concre...
متن کاملexperimental study on foamed sandy soil for epbm tunnelling
foam injection is becoming a standard conditioning agent when tunnelling with an earth-pressure balanced shield, resulting in an increasing interest in this technique. the technique is mostly based on empirical rules and experience. to be able to determine what foam and how may foam has to be injected for different soils, it is necessary to know the mechanical parameters of the foam-water-soil ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2014
ISSN: 1687-8434,1687-8442
DOI: 10.1155/2014/514759