Experimental Study of a Strip Footing under Inclined and Eccentric Load on Geogrid Reinforced Sandy Soil
نویسندگان
چکیده
منابع مشابه
Eccentrically loaded strip foundation on geogrid-reinforced sand
Results are presented for laboratory model tests conducted to determine the ultimate bearing capacity of an eccentrically loaded strip foundation supported by geogridreinforced sand. Only one type of sand at one relative density of compaction and one type of geogrid were used for the tests. The depth of the foundation was varied from zero to B (width of foundation). Based on the laboratory test...
متن کاملBearing capacity of shell strip footing on reinforced sand
In this paper, the ultimate load capacities of shell foundations on unreinforced and reinforced sand were determined by laboratory model tests. A series of loading tests were carried out on model shell footing with and without single layer of reinforcement. The tests were done for shell foundation at different shell embedment depth and subgrade density. The results were compared with those for ...
متن کاملStudy of bearing capacity of strip footing resting on reinforced sand
This research was performed to investigate the behavior of strip footing on geosynthetic reinforced sandy soil and to study the effect of different parameters contributing to their performance using laboratory model tests. The parameters investigated in the study included top layer spacing (u), width of reinforcement (b), vertical spacing between layers (s) and number of reinforcement layers (N...
متن کاملExperimental study on foamed sandy soil for EPBM tunnelling
Foam injection is becoming a standard conditioning agent when tunnelling with an earth-pressure balanced shield, resulting in an increasing interest in this technique. The technique is mostly based on empirical rules and experience. To be able to determine what foam and how may foam has to be injected for different soils, it is necessary to know the mechanical parameters of the foam-water-soil ...
متن کاملA Study on Load Capacity of Horizontal and Inclined Plate Anchors in Sandy Soils
Foundations of structures which are subjected to uplift loading require anchoring systems to resist pullout loads. Such anchors can be broadly classified as gravity anchors, pile anchors and plate anchors. Plate anchors can be circular, square or strip in shape. The loading applied on plate anchors can be vertical, inclined or horizontal depending on the anchor orientation. In this study, vario...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tikrit Journal of Engineering Sciences
سال: 2017
ISSN: 1813-162X,2312-7589
DOI: 10.25130/tjes.24.2017.07