Experimental Study for Materials Prosthetic above Knee Socket under Tensile or Fatigue Stress with Varying Temperatures Effect

Socket design for the above-knee amputee.

Computer-aided design of a prosthetic socket for an above-knee amputee.

A computer-aided design process for fabricating the rectified cast for an above-knee prosthetic socket is described. The methodology for collecting the parameters required for the computer analysis is discussed. The input variables include the unloaded shape of the residual limb, the mechanical properties of the soft tissues that comprise the limb, and the surface loading that deforms the tissu...

The TC double socket above-knee prosthesis.

The conventional total contact suction AK prosthesis presents several disadvantages, such as difficulty in wearing the socket in a sitting position, difficulty in obtaining a favourable disposition of the stump soft tissues in the socket and difficulty in avoiding stump perspiration problems. In an attempt to solve these disadvantages, a new AK prosthesis with a thermoplastic double socket was ...

A computer-aided socket design procedure for above-knee prostheses.

A computer-aided socket design procedure (CASD) has been developed whereby an above-knee socket shape can be created based on anthropometric measurements taken from an amputee. The anthroometric measurements are used to select a subset of three reference shapes from a Reference Shape Library stored in the computer in the form of three-dimensional numerical data. Transformation procedures then s...

Shape sensing for computer aided below-knee prosthetic socket design.

Shape sensing is useful in the computer aided prosthetic fitting process for two purposes. 1. To input characteristic prosthetic shapes that have been developed over the years through the experience of prosthetists. 2. To provide an accurate and rapid measurement of the anatomical shape of the stump. This paper describes two instruments which have been built to meet these objectives.