Experimental Study and Process Optimization for Vibration-assisted Dry Micro-WEDM
نویسندگان
چکیده
منابع مشابه
Parametric Study of Dry WEDM Using Taguchi Method
Wire Electrical Discharge Machining (WEDM) is a non-traditional thermo-electric process capable of machining hard materials of highly complex three dimensional shapes. In this paper, the dry WEDM experimentation is conducted using oxygen as a dielectric medium. The deionized water is replaced by the oxygen as a dielectric medium to ameliorate the environmental impact in the machining surroundin...
متن کاملExperimental study on micro/macro manipulator vibration control
This work investigates issues related to vibration control in a micro/macro manipulator. This paper provides experimental results obtained by the combination of two dissimilar flexible control techniques to a micro/macro flexible link test bed. Inertial damping and command filtering techniques are implemented simultaneously to form a robust controller that results in minimal residual vibration ...
متن کاملDry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning
Nowadays the surface texturing has been widely recognized as a usable capability to improve the tribological systems. In this paper, ultrasonic assisted turning (UAT) isperformed to create the micro textures on the flat faces. Micro surface texturing ismade on the Al7075-T6 by the UAT in the face turning process. Then, the influences of cutting speed feed, vibration direction and vibration ampl...
متن کاملDry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning
Nowadays the surface texturing has been widely recognized as a usable capability to improve the tribological systems. In this paper, ultrasonic assisted turning (UAT) isperformed to create the micro textures on the flat faces. Micro surface texturing ismade on the Al7075-T6 by the UAT in the face turning process. Then, the influences of cutting speed feed, vibration direction and vibration ampl...
متن کاملDevelopment of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process
A new dynamic friction model for modeling of elliptical vibration assisted turning (EVAT) was developed in this research. The periodic change of the friction force direction is known to be one of the most important causes of this phenomenon. In modeling of machining processes (including the EVAT process), static Coulomb friction model was employed by most of the researchers. Because of the peri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society for Precision Engineering
سال: 2014
ISSN: 1225-9071
DOI: 10.7736/kspe.2014.31.3.215