Experimental Study and Numerical Simulation of Injection Molding Process for Special-shaped Plastic Part
نویسندگان
چکیده
منابع مشابه
Experimental Study and Numerical Simulation of Injection Molding Process for Special-Shaped Plastic Part
Taking the special-shaped plastic part as the research object, numeric simulation and experimental study of the injection molding process are completed based on the synthetical application of numeric simulation technology, orthogonal experiment method, Moldflow, injection machine and CMM. Optimal feeding system and molding process parameters are obtained and qualified products are produced. The...
متن کاملFinding efficient frontier of process parameters for plastic injection molding
Product quality for plastic injection molding process is highly related with the settings for its process parameters. Additionally, the product quality is not simply based on a single quality index, but multiple interrelated quality indices. To find the settings for the process parameters such that the multiple quality indices can be simultaneously optimized is becoming a research issue and ...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
A Study on Computer Simulation of Plastic Lens Molding Process
In this paper, some molding process parameters such as injection time, packing time, packing pressure and process temperature etc. were optimized by the Computer Aided Engineering (CAE) simulation (Moldex 3D) for injection molding of a plastic lens. Some experimental trials were carried out for verifying of the CAE simulation results with checking of the lens shrinkage and birefringence etc. as...
متن کاملExperimental and Numerical Investigation of Thickness on the Shrinkage and out of Roundness in Cylindrical Parts in Injection Molding Process
Injection molding process is one of the most important methods of forming in the plastics manufacturing industry. Shrinkage and out of roundness are phenomenons that affect the final product quality. In this study, the effect of the thickness of cylindrical parts from polypropylene material on shrinkage and out of roundness has been investigated. For this purpose, injection molding process is s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Open Mechanical Engineering Journal
سال: 2015
ISSN: 1874-155X
DOI: 10.2174/1874155x01509010416