Experimental Study and Identification of Optimal Cutting Parameters on Cutting Forces in Turning Using Taguchi Based Fuzzy Logic

Experimental Study on the Cutting Surface Roughness in Cnc Turning Operations by Using Taguchi Technique

Surface roughness is used to determine and evaluate the quality of a final product in turned parts. In order to get better surface finish, the proper setting of cutting parameters is crucial before the process takes place. Titanium Grade 5 material is one whose surface hardness is high and it is used for making Aerospace engine components, titanium rod and ideal materials for medical implements...

Fuzzy logic and regression modelling of cutting parameters in drilling using vegetable based cutting fluids

In machining industry, cutting fluids have an important role due to their lubrication, cooling and chip removal functions. Using of cutting fluids can improve machining process efficiency, tool life, surface quality and it can reduce cutting forces and vibrations. However, health and environmental problems are encountered with the use of cutting fluids. Therefore, there has been a high demand f...

SIMULATION AND MONITORING OF THE MACHINING PROCESS VIA FUZZY LOGIC AND CUTTING FORCES

On time replacement of a cutting tool with a new one is an important task in Flexible Manufacturing Systems (FMS). A fuzzy logic-based approach was used in the present study to predict and simulate the tool wear progress in turning operation. Cutting parameters and cutting forces were considered as the input and the wear rate was regarded as the output data in the fuzzy logic for construct...

Multi Objective Optimization of Cutting Parameters in Turning Operation to Reduce Surface Roughness and Cutting Forces

Experimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets

This study aimed to evaluate Laser-cutting process of Mild Steel St37 sheets with two different thicknesses. In order to evaluate the quality of cutting edge and the depth of the area affected by the heat, several tests were conducted to determine the effect of parameters such as Laser power, Laser beam movement speed and pressure of axillary gas on the quality of cutting edge and the depth of ...