Experimental studies on local evaporating heat transfer of internal spiral-grooved tube.

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Heat Transfer Characteristics of the Non-uniform Grooved Tube considering Tube Expansion

A plate-fin heat exchanger is a type of heat exchanger widely used in air conditioners, and tubes and fins are tightly assembled by the mechanical expansion process of tubes. The tube expansion process deforms the grooves inside the tube, and the groove shapes also affect the adhesion between tubes and fins. In this study, the adhesion and heat transfer performance affected by the tube expansio...

متن کامل

Experimental Investigation on Heat Transfer of Silver-Oil Nanofluid in Concentric Annular Tube

In order to examine the laminar convective heat transfer of nanofluid, experiments carried out using silver-oil nanofluid in a concentric annulus with outer constant heat flux as boundary condition. Silver-oil nanofluid prepared by Electrical Explosion of Wire technique and observed no nanoparticles agglomeration during nanofluid preparation process and carried out experiments. The average size...

متن کامل

Measurement of Local Convective Heat Transfer Coefficient of Alumina-Water Nanofluids in a Double Tube Heat Exchanger

Heat transfer coefficient and thermal efficiency of γ-Al2O3/water nanofluids flowing through a double tube heat exchanger were experimentally investigated. The nanoparticles were well dispersed in distilled water at 0.05–0.15 %vol. A large number of experiments were performed at different fluid flow rates under turbulent flow regime (18,000<Re<40,000) and various nanofluid...

متن کامل

Experimental Study of Heat Transfer in an Evaporating Meniscus on a Moving Heated Surface

A stable meniscus is formed by a circular nozzle dispensing water over a heated circular face of a rotating cylindrical copper block. The nozzle is offset from the axis of rotation of the copper block and thus a moving meniscus is formed on the surface. The water flow rate, heater surface temperature, and the speed of rotation are controlled to provide a stable meniscus with continuous evaporat...

متن کامل

Experimental Investigation of Heat Transfer Effectiveness on Finned - Tube Thermoacoustic Heat Exchanger

Heat exchangers are some of the most important parts in thermoacoustic devices. In an oscillatory flow condition, the flow and temperature fields around the heat exchangers can be quite complex and it may significantly affect their heat transfer behaviour. As a result, one cannot directly apply the heat transfer correlations for a steady flow to the design of heat exchangers operating in oscill...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B

سال: 1985

ISSN: 0387-5016,1884-8346

DOI: 10.1299/kikaib.51.1042