Experimental studies of temperature separation and flow field for different geometrical parameters in Ranque-Hilsch vortex tube
نویسندگان
چکیده
منابع مشابه
Maxwell's demon in the Ranque-Hilsch vortex tube.
A theory was developed that explains energy separation in a vortex tube, known as one of the Maxwellian demons. It appears that there is a unique relation between the pressures in the exits of the vortex tube and its temperatures. Experimental results show that the computed and measured temperatures are in very good agreement.
متن کاملPerformance Evaluation of a Ranque-Hilsch Vortex Tube with Optimum Geometrical Dimensions
A brass Vortex Tube (VT) with interchangeable parts is used to determine the optimum cold end orifice diameter, main tube length and diameter. Experim...
متن کاملExperimental Evaluation of a Ranque- Hilsch Vortex Tube as a Particle Separator
R & D Journal of the South African Institution of Mechanical Engineering 2012,28,25-30 http://www.saimeche.org.za (open access) © SAIMechE All rights reserved. 25 The Pebble Bed Modular Reactor (PBMR) is a Generation IV graphite-moderated helium cooled nuclear reactor developed in South Africa from the German Arbeitsgemeinschaft Versuchreaktor (AVR). After decommissioning of the AVR plant, radi...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
performance evaluation of a ranque-hilsch vortex tube with optimum geometrical dimensions
a brass vortex tube (vt) with interchangeable parts is used to determine the optimum cold end orifice diameter, main tube length and diameter. experiments were carried out to study the effects of operating pressure as well. it is shown that there is an optimum value for cold end orifice diameter, which is equal to 4mm and there is an optimum value for cold and hot exit temperature difference at...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Thermal Science
سال: 2012
ISSN: 0354-9836
DOI: 10.2298/tsci110921047m