Experimental Research on Noise Reduction for Continuous Transonic Wind Tunnel Loop
نویسندگان
چکیده
منابع مشابه
11-Foot Transonic Wind Tunnel
This paper describes a modeling method and a new optimal control approach to investigate a Mach number control problem for the NASA Ames 11-Foot Transonic Wind Tunnel. The flow in the wind tunnel is modeled by the 1-D unsteady Euler equations whose boundary conditions prescribe a controlling action by a compressor. The boundary control inputs to the compressor are in turn controlled by a drive ...
متن کاملA Shock Tube Driven Transonic Wind Tunnel
A small transonic wind tunnel was designed, constructed and calibrated in order to provide a tool for the study and demonstration of transonic flow phenomena. The wind tunnel makes use of flow properties following the propagation of a shock wave along a tube in order to create the transonic flow. This is in contrast to conventional transonic facilities which are supplied from a reservoir or com...
متن کاملClosed-Loop Control Wind Tunnel Tests on an Adaptive Wind Turbine Blade for Load Reduction
Wind tunnel tests on a non-rotating, dynamically scaled wind turbine blade equipped with variable trailing edge geometry were carried out. The effectiveness of the system for active load reduction purposes, with the interaction between structural dynamics, aerodynamics and control was tested. The actuation of the adaptive trailing edge was based on a piezoelectric bender actuator. The full aero...
متن کاملEXPERIMENTAL INVESTIGATION OF EFFECTS OF WALL POROSITY AND SUCTION ON THE FLOW QUALITY IN A TRANSONIC WIND TUNNEL
A trisonic wind tunnel has been modified to improve its flow quality when operating at transonic speeds through perforated walls and side suctions. The usefulness of such a perforated wall, already known, is reduction of the blockage effect as well as the shock elimination. Two types of perforated walls have been used in this investigation. The first wall had a porosity of about 22% and the hol...
متن کاملOn-road and wind-tunnel measurement of motorcycle helmet noise.
The noise source mechanisms involved in motorcycling include various aerodynamic sources and engine noise. The problem of noise source identification requires extensive data acquisition of a type and level that have not previously been applied. Data acquisition on track and on road are problematic due to rider safety constraints and the portability of appropriate instrumentation. One way to add...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University
سال: 2020
ISSN: 1000-2758,2609-7125
DOI: 10.1051/jnwpu/20203840855