Experimental research and effect on mechanical and wear properties of aluminium based composites reinforced with Zn/Sic particles
نویسندگان
چکیده
Abstract In this investigation, Al-/Zn/SiC composite with various weight percentages of SiC were manufactured via powder metallurgy (PM) route. Using the approach, composites are created by changing amount in range 5–15% respectively. Under fretting wear test, tribological characteristics these materials examined at load (5N, 10N, 15N), constant control parameters like that frequency (20 Hz), temperature (at room temperature), stroke length (0.50 mm) and time min). The test findings showed compared to unreinforced alloy SiC-reinforced aluminium hybrid matrix (AHMC’s) a lower loss (i.e. 0.002 gm). It was found friction coefficient Al/5%Zn/10%Sic reduced increasing applied load. Additionally, an increase content, mechanical properties i.e. Tensile Strength Hardness fabricated increases base material. This study resistance is greatly increased addition both synthetic reinforcement Silicon Carbide) low melting point Zinc, 99%, −325 mesh). Overall, our show AHMC’s might be regarded as superior material industries aerospace automotive engineering, where play important role.
منابع مشابه
Thermal Stability and Dynamic Mechanical Properties of Nano and Micron-TiO2 Particles Reinforced Epoxy Composites: Effect of Mixing Method
متن کامل
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولMechanical properties of aluminium-based metal matrix composites reinforced with -alumina platelets
The tensile properties of an aluminium-based metal matrix composite reinforced with a-alumina platelets were investigated from an experimental and a theoretical point of view. An increase in Young modulus, 0,2% proof stress, flow stress and ultimate tensile strength was observed over the unreinforced metal. These improvements were obtained at the expense of the tensile ductility. The experiment...
متن کاملPhysio-mechanical Properties of Aluminium Metal Matrix Composites Reinforced with Al2O3 and SiC
Particulate reinforced metal matrix composites (MMCs) are potential materials for various applications due to their advantageous of physical and mechanical properties. This paper presents a study on the performance of stir cast Al2O3 SiC reinforced metal matrix composite materials. The results indicate that the composite materials exhibit improved physical and mechanical properties, such as, lo...
متن کاملMechanical Properties Characterization of Biax and Triax Composites Based on Limited Experimental Data
The main goal of this research is to extract the full mechanical properties of stitch biax and triax composite materials which are necessary for finite element analysis, based on limited available experimental data and without performing full static characterization tests. Utilized experimental data are limited to elastic modulus of two 0o and 45o directions. Using presented technique and afore...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Discover materials
سال: 2023
ISSN: ['2730-7727']
DOI: https://doi.org/10.1007/s43939-023-00045-7