EXPERIMENTAL PREDICTION AND OPTIMIZATION OF MATERIAL REMOVAL RATE DURING HARD TURNING OF AUSTENITIC 304L STAINLESS STEEL
نویسندگان
چکیده
منابع مشابه
Formation of annealing twins during recrystallization and grain growth in 304L austenitic stainless steel
Understanding of the mechanisms of annealing twin formation is fundamental for grain boundary engineering. In this work, the formation of annealing twins in a 304L austenitic stainless steel is examined in relation to the thermo-mechanical history. The behavior of annealing twins of various morphologies is analyzed using an in-situ annealing device and EBSD. The results confirm that there is a ...
متن کاملDesign optimization of cutting parameters for turning of AISI 304 austenitic stainless steel using Taguchi method
In the present work Taguchi method is used to optimize cutting parameters during dry turning of AISI 304 austenitic stainless steel with AlTiCrN coated tool. The coating was deposited on fine-grained K-grade (ISO K-20) cemented carbide cutting insert using physical vapor deposition (PVD) technique. The turning parameters evaluated are cutting speed of 200 and 260 m/min, feed rate of 0.20 and 0....
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Surface characterization of austenitic stainless steel 304L after different grinding operations
Background: The austenitic stainless steel 304L is widely used as a structural material for which the finished surface has significant effect on the service performance. A study of the grinding process with regard to the quality of the ground surfaces is therefore interesting from the point of view of both industrial application and scientific research. Method: This work investigates the influe...
متن کاملStudy of microEDM parameters of Stainless Steel 316L: Material Removal Rate Optimization using Genetic Algorithm
Suresh P, Venkatesan R, Sekar T, Sathiyamoorthy V # Professor, Department of Mechanical Engineering, Sona College of Technology, Salem, Tamil Nadu, India [email protected] [email protected] Associate Professor Department of Mechanical Engineering, Government College of Engineering, Salem, Tamil Nadu, India [email protected] Asst. Professor Department of Mechanical Engineering, Mahendra E...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Science and Technology (Ghana)
سال: 2016
ISSN: 0855-0395
DOI: 10.4314/just.v36i2.4