Experimental Performance Evaluation on V-shaped Butt Welding Using GMA Welding Double Wire Reel and Remote Control Torch Welding Technique
نویسندگان
چکیده
منابع مشابه
Correction of Butt-welding Induced Distortions by Laser Forming
Welding-induced distortion is an intrinsic phenomenon arising due to the thermally induced strain distributions in the weld and surrounding material. The distortion can be minimized during the pre-process, real-time, or postprocess stages. In the present paper, the laser forming (LF) technology is utilized for the post correction of welding-induced distortion. The out-of-plane distortion can be...
متن کاملCorrection of Butt-Welding induced Distortion by Laser Forming
Welding-induced distortion is an intrinsic problem arising due to the mismatch of thermal expansions in the weld and surrounding material. The distortion can be minimized through the pre-process, in process, or post-process methodology. In the present paper, the laser forming (LF) technology is utilized for the post correction of the welding-induced distortion. Three types of weld paths are app...
متن کاملArc welding Control for Shaped Metal Deposition Process
This paper is focused on the study and the control of a deposition process of robotic arc welding. The process consists of a SMD (Shaped Metal Deposition) system, that is a novel rapid prototyping tungsten inert gas (TIG) welding technique leading to near-net-shape, using a layer by layer deposition technique. An experimental setup has been properly implemented in order to study the system and ...
متن کاملTušek: Bridging of Welding Gaps in Welding with a Multiple-wire Electrode
An investigation on bridging larger welding gaps between workpieces occurring in practice due to structural requirements or to defects in weld edge preparation is described. Some characteristic cases from practice where a larger root gap should be bridged or the space between two or three workpieces should be filled with a greater quantity of filler material are described. Submerged-arc welding...
متن کاملWelding Aluminum Alloy 6061 with Opposing Dual Torch Gtaw Process
Cracking is a major concern in welding aluminum alloys. Although weld solidification cracks can be eliminated through addition of filler alloy, the additives modify the alloy or base-metal constituents and may not always be desirable. High-energy beam processes, such as electron-beam welding, that result in minimal heat input reduce crack sensitivity, but their high cost limits their applicatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korea Academia-Industrial cooperation Society
سال: 2015
ISSN: 1975-4701
DOI: 10.5762/kais.2015.16.2.1339