Experimental method for creep characterization of polymeric foam materials in media immersion
نویسندگان
چکیده
منابع مشابه
Tubular Ceramic Foam Via Polymeric Sponge Method
Tubular ceramic foams were prepared by using natural clay as starting material and 120 ppi polyurethane foam as template via polymeric sponge method. Samples were sintered with different temperatures from 1200°C to 1280°C. The result shows that 1250°C is the ideal sintering temperature where the highest compressive strength of 1.980MPa at 47.31% porosity is obtained. The highest value in compre...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Synthesis and characterization of the electrospun fibers prepared from waste polymeric materials
Recently, the demands for the production of many different types of plastic wastes are greatly growing that subsequently, lead to the serious challenges in environmental considerations. Since, these materials are rarely resolved by microorganisms, hence, their recycling to the useful materials is crucial. In the present study, we used a solution electrospinning technique to synthesize nano/micr...
متن کاملSynthesis and characterization of the electrospun fibers prepared from waste polymeric materials
Recently, the demands for the production of many different types of plastic wastes are greatly growing that subsequently, lead to the serious challenges in environmental considerations. Since, these materials are rarely resolved by microorganisms, hence, their recycling to the useful materials is crucial. In the present study, we used a solution electrospinning technique to synthesize nano/micr...
متن کاملMechanosorptive creep in nanocellulose materials
The creep behavior of nanocellulose films and aerogels are studied in a dynamic moisture environment, which is crucial to their performance in packaging applications. For these materials, the creep rate under cyclic humidity conditions exceeds any constant humidity creep rate within the cycling range, a phenomenon known as mechanosorptive creep. By varying the sample thickness and relative humi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanics of Time-Dependent Materials
سال: 2020
ISSN: 1385-2000,1573-2738
DOI: 10.1007/s11043-020-09457-x