Experimental Issues in Testing a Semiactive Technique to Control Earthquake Induced Vibration
نویسندگان
چکیده
منابع مشابه
A Semiactive Vibration Control Design for Suspension Systems with Mr Dampers
In an automotive system, the vehicle suspension usually contributes to the vehicle's handling and braking for good active safety and driving pleasure and keeps the vehicle occupants comfortable and reasonably well isolated from road noise, bumps and vibrations. The design of vehicle suspension systems is an active research field in automotive industry (Du and Zhang, 2007; Guglielmino, et al., 2...
متن کاملearthquake vibration control of structures using tuned liquid dampers: experimental studies
earlier studies have shown conclusively that a tuned liquid damper (tld) is effective for controlling vibrations in structures subjected to narrow-banded wind excitations. a recent numerical study has shown that if the design parameters of a tld are properly set, this device could also be very effective for controlling structural vibration to broad-banded earthquake excitations. here the result...
متن کاملSemiactive Control System based on MR Damper for Suppressing Vibration of Stay Cable under Wind Load
This paper investigates the performance of the semiactive control system based on magnetorheological fluid (MR) dampers for suppressing excessive vibration of stay cable installed in cable-stayed bridges under wind load. The cable model is extracted from a 156.3 m long stay cable with high tension. The external wind load is generated from the widely used wind load spectrum such as the Kaimal sp...
متن کاملA Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes
The dynamic response of slopes against earthquake is commonly characterized by the earthquake-induced displacement of slope (EIDS). The EIDS value is a function of several variables such as the material properties, slope geometry, and earthquake acceleration. This work is aimed at the prediction of EIDS using the Monte Carlo simulation method (MCSM). Hence, the parameters height, unit specific ...
متن کاملMagnetic levitation technique for active vibration control
This chapter presents an application of zero-power controlled magnetic levitation for active vibration control. Vibration isolation are strongly required in the field of high-resolution measurement and micromanufacturing, for instance, in the submicron semiconductor chip manufacturing, scanning probe microscopy, holographic interferometry, cofocal optical imaging, etc. to obtain precise and rep...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Modelling and Simulation in Engineering
سال: 2014
ISSN: 1687-5591,1687-5605
DOI: 10.1155/2014/535434