Experimental Investigations on Mechanical Properties of Alkali Activated Coarse Aggregate in Concrete

نویسندگان

چکیده

The present study focused on developing Alkali Activated Fine Aggregate (AAFA) by palletization method. AAFA was manufactured using Ground Granulated Blast Furnace Slag (GGBS) and alkali activator solution at ambient conditions. Sodium hydroxide of six molarity sodium silicate to ratio 2.5 used. AACA's properties are similar Natural except for flakiness elongation index. water absorption Abrasion value have high AACA compared natural aggregate. slump is an increase in replacement level up 40% aggregate further there decrees a slump. Compressive, Split, Flexural strength has shown noticeable all levels However, beyond the 40 % level, decrease strength. It may be attributed reduced bond between paste

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mechanical Properties and Eco-Efficiency of Steel Fiber Reinforced Alkali-Activated Slag Concrete

Conventional concrete production that uses ordinary Portland cement (OPC) as a binder seems unsustainable due to its high energy consumption, natural resource exhaustion and huge carbon dioxide (CO₂) emissions. To transform the conventional process of concrete production to a more sustainable process, the replacement of high energy-consumptive PC with new binders such as fly ash and alkali-acti...

متن کامل

SELF-Cured Alkali Activated Slag Concrete Mixes- An Experimental Study

Alkali Activated Slag Concrete (AASC) mixes are manufactured by activating ground granulated blast furnace slag (GGBFS) using sodium hydroxide and sodium silicate solutions. The aim of the present experimental research was to investigate the effect of increasing the dosages of sodium oxide (Na2O, in the range of 4 to 8%) and the activator modulus (Ms) (i.e. the SiO2/Na2O ratio, in the range of ...

متن کامل

Basic Mechanical Properties of Basalt Fiber Reinforced Recycled Aggregate Concrete

In order to study the basic mechanical properties of basalt fiber reinforced recycled aggregate concrete, the concrete mix ratio, the length and the volume mixing ratio of chopped basalt fiber yarn are designed for changing factors. A total of 324 specimens have been completed for this investigation. The compressive strength, splitting tensile strength, elastic modulus and axial compressive str...

متن کامل

mechanical and durability properties of slag based recycled aggregate concrete

in this paper, the possibility of using recycled aggregate (ra) and ground granulated blast furnace slag (ggbfs) to produce a structural concrete was studied by compromising strength to a lesser extent. hence an attempt has been made to study the strength and durability characteristics of the ggbfs-based recycled aggregate concrete. four different groups of mixes were designed by replacing natu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: SSRG international journal of civil engineering

سال: 2022

ISSN: ['2348-8352']

DOI: https://doi.org/10.14445/23488352/ijce-v9i10p101