Experimental investigations on adhesive free laminated oak timber beams and timber-to-timber joints assembled using thermo-mechanically compressed wood dowels
نویسندگان
چکیده
منابع مشابه
Feasibility of glued laminated timber beams 1 with tropical hardwoods
11 A feasibility study of glulam was carried out in French Guiana using local wood species. The aim 12 was to determine gluing parameters affording satisfactory behaviour to manufactured glulam in 13 a tropical climate. 14 Three abundant wood species, with special properties, were selected for the study and 15 Resorcinol-Phenol-Formaldehyde resin was used for bonding. Three industrial parameter...
متن کاملBolted Timber Joints with Self-tapping Screws
The use of self-tapping screws with continuous threads in the joint area as a reinforcement to avoid splitting of timber members is studied. A theoretical model is developed to calculate the stress distribution around a pin-loaded hole in a timber joint, to predict brittle failure modes in bolted connections and to calculate the load in the reinforcing screws. Laboratory experiments on reinforc...
متن کاملCreep Behaviour of Heterogeneous Timber-UHPFRC Beams Assembled by Bonding: Experimental and Analytical Investigation
The purpose of this research was to investigate the creep behaviour of the heterogeneous Timber-UHPFRC beams. New developments have been done to further improve the structural performance, such as strengthening of the timber (glulam) beam by bonding composite material combine with an ultra-high performance fibre reinforced concrete (UHPFRC) internally reinforced with or without carbon fibre rei...
متن کاملTests to Determine the Joint Stiffness and Resisting Moment Capacity of Joints in Timber-Framed Houses
Wind and earthquake disasters in the world often cause billions of dollars of damage to buildings, most of which is to non-engineered buildings-especially homes. Wood-frame homes use connectors which exhibit partial rotational rigidity at the member ends, making analytical solutions difficult. This is due to the lack of information about the complex behavior of the connections used in this type...
متن کاملDesign approaches for timber-glass beams
This paper relates to the mechanical performance of timber-glass composite beams, which take exceptional advantage of the combination of the materials involved. Beam bending tests were performed with beams made from float glass and heat-strengthened glass. Three different adhesive types were used: silicone, acrylate and epoxy. The test results show that, with a proper design, the timber is able...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction and Building Materials
سال: 2019
ISSN: 0950-0618
DOI: 10.1016/j.conbuildmat.2019.05.163