Experimental investigations of particle formation from propellant and solvent droplets using a monodisperse spray dryer
نویسندگان
چکیده
منابع مشابه
synthesis of sulfides from alcohols and thiols in solvent-freeconditions and deoxygenation of sulfoxides
کاتالیست یک سنتز جدید برای تیواترها توصیف شده است. واکنش الکل ها با آریل، هتروآریل و آلکیل تیو ل ها درحضور 1،3،5- تری آزو- 2،4،6- تری فسفرین-2،2،4،4،6،6 هگزاکلراید ((tapc به عنوان یک کاتالیست موُثر، بازده های خوب تا عالی از تیواترها را حاصل می کند. علاوه براین، واکنش تحت شرایط بدون فلز و بدون حلال پیش می رود، بنابراین یک مکمل جالب برای روش های شناخته شده سنتز تیواترها ارائه می دهد. یک مکانیسم ا...
15 صفحه اولsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Experimental Study of Chemical Absorption of CO2 in a Bench-Scale Spray Dryer Absorber
The removal of CO2 through chemical absorption in a bench-scale spray dryer absorber was investigated experimentally using the lime slurry as absorbent. The effect of important operating parameters on CO2 removal efficiency has been investigated; in selected ranges of operating parameters, increasing gas inlet temperature and absorbent concentration lead to permanent efficiency decline, increas...
متن کاملFabrication of hydrophobic drug nanoparticles using a microfluidic spray dryer
We present a technique for fabricating hydrophobic drug nanoparticles using a microfluidic spray dryer. The nanoparticles are formed by evaporative precipitation of the spray in air at room temperature. Using danazol as a model drug, amorphous nanoparticles are yielded with narrow size distribution, 20-60 nm in diameter. As the device geometry allows us to inject two separate solvent streams, t...
متن کاملSimulation and Control of Spray Drying Using Nozzle Atomizer Spray Dryer
Spray drying is a commonly used method of drying a liquid feed through a hot gas. This study aims to obtain the empirical model of the spray drying process of full cream milk using a nozzle atomizer spray dryer, Lab-Plant SD 05 Laboratory Scale Spray Dryer. Inlet air temperature was chosen as the manipulated variable and outlet air temperature was the controlled variable. No disturbance was con...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Aerosol Science and Technology
سال: 2018
ISSN: 0278-6826,1521-7388
DOI: 10.1080/02786826.2018.1451818