Experimental Investigation on OSB Webbed Laminated Bamboo Lumber Box Shaped Joists
نویسندگان
چکیده
منابع مشابه
A low-technology approach toward fabrication of Laminated Bamboo Lumber
Depletion of natural resources has become a major concern in today’s modern industrialized world centering much attention on sustainability of the built environment and sustainable alternatives to current development and construction practices. In the green building community, strong interest lies in natural and renewable building materials that can be used in structural applications. Just such...
متن کاملDevelopment of Laminated Bamboo Lumber: Review of Processing, Performance, and Economical Considerations
As focus is drawn toward more sustainable construction practices, use of bamboo as a structural building material is growing as a topic of interest. It is highly renewable, has low-embodied energy, and has the highest strength-to-weight ratio of steel, concrete, and timber. Composite lumber made from bamboo, termed laminated bamboo lumber (LBL), has gained the particular interest of researchers...
متن کاملEvaluation of Water Absorption and its Influence on the Physical-Mechanical Properties of Bamboo-Bundle Laminated Veneer Lumber
To investigate the possibility of using bamboo-bundle laminated veneer lumber (BLVL) as a cooling tower packing material, the water absorption rates, thickness swelling rates, and flexural properties of three different composite materials were studied. The BLVL was combined with either 12% or 24% phenol formaldehyde resin (PF), and the moso bamboo strips were exposed to water baths at three dif...
متن کاملThe Effect of Joint Form and Parameter Values on Mechanical Properties of Bamboo-Bundle Laminated Veneer Lumber (BLVL)
Bamboo-bundle laminated veneer lumber (BLVL) was produced by joint lengthening technology. The objective of this study was to evaluate the effect of joint form and the values of key parameters on mechanical properties of BLVL. Two joint forms, i.e., finger joint and scarf joint, and two corresponding joint parameters, i.e., finger length and scarf angle, were investigated in laminates. The resu...
متن کاملCreep response of engineered wood i-joist and oriented strand board (OSB) floor systems
Creep response of a full-scale floor system fabricated with composite wood I-joists and oriented strand board (OSB sheathing) was measured for 280 days at sustained uniform loads of 20 psf (0.96 kPa). Creep responses of bare I-joists and 3-joist T-beams with OSB sheathing (glued and unglued tongue and groove sheathing joints) were measured under similar load levels and duration. The creep defle...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2019
ISSN: 2261-236X
DOI: 10.1051/matecconf/201927501003