Experimental Investigation on Mean Flow Development of a Three-Dimensional Wall Jet Confined by a Vertical Baffle

An experimental investigation of the flow in a plane wall jet with an initial gap

Experimental study and numerical simulation of three dimensional two phase impinging jet flow using anisotropic turbulence model

Hydrodynamic of a turbulent impinging jet on a flat plate has been studied experimentally and numerically. Experiments were conducted for the Reynolds number range of 72000 to 102000 and a fixed jet-to-plate dimensionless distance of H/d=3.5. Based on the experimental setup, a multi-phase numerical model was simulated to predict flow properties of impinging jets using two turbulent models. Mesh...

Experimental Investigation of the Effect of Vertical Tail on the Flow Field and Aerodynamic Forces of a fighter Model

An intensive experimental investigation was conducted to study the effect of vertical tail, single and twin (with different cant angles) on the flow field and the corresponding aerodynamic forces and moments of a model of a fighter A/C. Aerodynamic forces under different flight conditions and different vertical tail settings were measured in a supersonic wind tunnel. Furthermore, effects of ver...

Experimental Investigation of the Effect of Vertical Tail on the Flow Field and Aerodynamic Forces of a fighter Model

An intensive experimental investigation was conducted to study the effect of vertical tail, single and twin (with different cant angles) on the flow field and the corresponding aerodynamic forces and moments of a model of a fighter A/C. Aerodynamic forces under different flight conditions and different vertical tail settings were measured in a supersonic wind tunnel. Furthermore, effects of ver...

EXPERIMENTAL INVESTIGATION OF EFFECTS OF WALL POROSITY AND SUCTION ON THE FLOW QUALITY IN A TRANSONIC WIND TUNNEL

A trisonic wind tunnel has been modified to improve its flow quality when operating at transonic speeds through perforated walls and side suctions. The usefulness of such a perforated wall, already known, is reduction of the blockage effect as well as the shock elimination. Two types of perforated walls have been used in this investigation. The first wall had a porosity of about 22% and the hol...