Experimental Investigation on Compressive Strength, Ultrasonic Characteristic and Cracks Distribution of Granite Rock Irradiated by a Moving Laser Beam

نویسندگان

چکیده

Efficient fracturing is the key issue for exploitation of geothermal energy in a Hot Dry Rock reservoir. By using laser irradiation cracking method, this study investigates changes uniaxial compressive strength, ultrasonic characteristics and crack distributions granite specimens by applying beam under various conditions, including different powers, diameters moving speeds beam. The results indicate that strength considerably dependent on power, diameter speed ultrasonic-wave velocity amplitude first wave both increase with decreased increased or form irradiated graphite flattened comparing original specimen without irradiation. angle ratio cracked area at ends are also related to parameters. interior cracks observed be well-developed around bottom grooving kerf generated new economical practical method can efficiently fracture graphite.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigation of the ultrasonic welding strength in glass fiber reinforced thermoset polymers with surface preparation method using laser beam

In this research, tensile strength of ultrasonic welded parts made of thermoset polymer-reinforced glass fiber with surface preparation has been investiagted. In order to elevate the adhesion of two surfaces laser grooving method has been applied. Two type of thermoplastic materials including Plymethyl methacrylate (PMMA) and polypropylene (PP) have been used as interlayers. Influences of main ...

متن کامل

Investigation of the ultrasonic welding strength in glass fiber reinforced thermoset polymers with surface preparation method using laser beam

In this research, tensile strength of ultrasonic welded parts made of thermoset polymer-reinforced glass fiber with surface preparation has been investiagted. In order to elevate the adhesion of two surfaces laser grooving method has been applied. Two type of thermoplastic materials including Plymethyl methacrylate (PMMA) and polypropylene (PP) have been used as interlayers. Influences of main ...

متن کامل

Experimental Study on Compressive Strength of Brick Using Natural Fibres

Despite the use of modern materials, clay bricks are reasonably preferable materials nowadays. However, the moo fetched and flexibility of clay bricks are not related with tall natural and feasible values, particularly with regard to crude fabric sources and fabricating processes. Agricultural world is growing fast, with increased rural arrive development and land cultivation leading to massive...

متن کامل

Laser Rock Drilling by A Super-Pulsed CO2 Laser Beam

High power carbon dioxide lasers have successfully been used in drilling or cutting ngineering materials such as metals, polymers and ceramics over the years. Can a arbon dioxide laser be used to efficiently drill different rocks in a deep gas well? esearch sponsored by US Department of Energy has been carried out to answer this uestion. This paper will report the study results of using a super...

متن کامل

investigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem

در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Applied sciences

سال: 2022

ISSN: ['2076-3417']

DOI: https://doi.org/10.3390/app122010681