Experimental Investigation of Variable Damping Properties for Viscous Damper Utilizing a Magnetic Responsive Fluid

OPTIMUM LAYOUT OF NONLINEAR FLUID VISCOUS DAMPER FOR IMPROVEMENT THE RESPONSES OF TALL BUILDINGS

The utilization of passive energy dissipation systems has been created a revolution in the structural engineering industry due to their advantages. Fluid Viscous Damper (FVD) is one of these control systems. It has been used in many different industries, such as the army, aerospace, bridge, and building structures. One of the essential questions about this system is how it can combine with the ...

Viscous cavity damping of a microlever in a simple fluid.

We consider the problem of oscillation damping in air of a thermally actuated microlever as it gradually approaches an infinite wall in parallel geometry. As the gap is decreased from 20 microm down to 400 nm, we observe the increasing damping of the lever Brownian motion in the fluid laminar regime. This manifests itself as a linear decrease in the lever quality factor accompanied by a dramati...

Experimental investigation on a colloidal damper rendered controllable under the variable magnetic field generated by moving permanent magnets

Causal implications of viscous damping in compressible fluid flows

Classically, a compressible, isothermal, viscous fluid is regarded as a mathematical continuum and its motion is governed by the linearized continuity, Navier-Stokes, and state equations. Unfortunately, solutions of this system are of a diffusive nature and hence do not satisfy causality. However, in the case of a half-space of fluid set to motion by a harmonically vibrating plate the classical...

A new energy-based method for evaluating the damping properties of cable-damper systems

External dampers and cross-ties are commonly used to control vibrations of stay cables on cable-stayed bridges. While dampers contribute directly to the structural damping of the attached cables, cross-ties mainly help to increase the stiffness of the connected cable system. The idea of incorporating cross-ties with dampers has also been attempted in a few recent applications to benefit from th...