Experimental investigation of two-dimensional delamination in GFRP laminates

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Predicting Drilling Forces and Delamination in GFRP Laminates using Fuzzy Logic

Drilling of fiber reinforced plastics is necessary in order to assemble complex/intricate composite products. Drilling induced damage leads to high percentage of part rejection and reduced product efficiency and life. The thrust force and torque have been found to be the important factors influencing damage. In the present research endeavor, an attempt has been made to develop a fuzzy rule base...

متن کامل

Investigation of Repeated Low Velocity Impact Behaviour of GFRP /Aluminium and CFRP /Aluminium Laminates

The objective of this research was to investigate esponse of repeated low velocity impact tests on glass fibre/ epoxy-Al metal laminates (GEAML) and carbon fibre/ epoxy-Al metal laminates (CEAML) at the same location using drop-weight tester. CEAML, GEAML as well as monolithic Al panels of the same thickness were impacted repeatedly up to four impacts. The effect of repeated impacts on specimen...

متن کامل

Parametric Study of Movement Path in Two-dimensional Wing Flow Separation: Experimental Investigation

The aim of this experimental study is two-dimensional investigation of cargo behavior after separation which is carried out in the subsonic wind tunnel. Given that the real separation occurs in three-dimension, the results of this study may be widely used in numerical aerodynamic studies for verification of new computational methods and they can be used as the reference results in this area. So...

متن کامل

Multi-spot Laser Scanning Thermography for Delamination Inspection GFRP Structure in CFRP/GFRP Structure

In this study, a multi-spot laser scanning thermography (MLST) system is developed for automated, rapid and long-range inspection of delamination in composite structures. First, thermal waves are generated by scanning a multi-spot laser beam over a target composite structure, and the corresponding thermal waves are measured by using an infrared (IR) camera. Then a thermal image processing algor...

متن کامل

Performance of Corrosion-Damaged HSC Beams Strengthened with GFRP Laminates

This paper presents the results of an experimental program conducted for evaluating the performance of corrosion damaged HSC beams strengthened with GFRP laminates. Five Beam specimens of size 150x250x3000 mm were caste and tested for the present investigation. One beam specimen was neither corroded nor strengthened to serve as reference. Two beams were corroded to serve as corroded control. A ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Engineering Fracture Mechanics

سال: 2018

ISSN: 0013-7944

DOI: 10.1016/j.engfracmech.2018.05.015