Experimental investigation of the tip leakage flow in a low-speed multistage axial compressor
نویسندگان
چکیده
منابع مشابه
Investigation of Tip-leakage-vortex Breakdown and Its Role in Rotating Stall in a 1.5-stage Low-speed Axial-compressor
April 10-15, 2016 Abstract A whole-annulus unsteady numerical simulation is carried out to investigate the mechanism of the rotating stall in a 1.5-stage low-speed axial-compressor. By comparing the experimental and numerical results, the numerical results are validated. The numerical simulation captures the most features of the rotating stall of the 1.5-stage compressor observed from the exper...
متن کاملEffects of Different Turbulence Models in Simulation of Unsteady Tip Leakage Flow in Axial Compressor Rotor Blades Row
Characteristics of rotor blade tip clearance flow in axial compressors can significantly affect their performance and stable operation. It may also increase blade vibrations and cause detrimental noises. Therefore, this paper is contributed to investigate tip leakage flow in a low speed isolated axial compressor rotor blades row. Simulations are carried out on near-stall condition, which is val...
متن کاملA Numerical Investigation on the Unstable Flow in a Single Stage of an Axial Compressor
An unsteady two-dimensional finite-volume solver was developed based on Van Leer’s flux splitting algorithm in conjunction with “Monotonic Upstream Scheme for Conservation Laws (MUSCL)” limiters to improve the order of accuracy and the two-layer Baldwin-Lomax turbulence model was also implemented. Two test cases were prepared to validate the solver. The computed results were compared with the e...
متن کاملNumerical Investigation for the Impact of Single Groove on the Stall Margin Improvement and the Unsteadiness of Tip Leakage Flow in a Counter-Rotating Axial Flow Compressor
A low-speed counter-rotating axial flow compressor (CRAC) with single circumferential grooved casing treatment (CT) was investigated numerically. Both steady and time-accurate numerical calculations were performed to study the effects of the single grooved CTs over the rear rotor on the stability enhancement and the unsteadiness of tip leakage flow (TLF) in the CRAC. Parametric studies indicate...
متن کاملPerformance Modeling and Examination of Losses in the Axial -Flow Compressor and Comparisonwith Experimental Results
The performance prediction of axial flow compressors at different speeds and under various pressure ratio conditions are still being developed because of costly empirical experiments. One-dimensional modeling is a simple, fast and accurate method for performance prediction in any type of compressor with different geometries. In this approach, inlet flow conditions and compressor geometry are kn...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science Progress
سال: 2020
ISSN: 0036-8504,2047-7163
DOI: 10.1177/0036850420951070