Experimental Investigation of the Machinability of Caldie Cold Work Tool Steel

Orvar Supreme Sicak İş Takim Çeli̇ği̇ni̇n İşlenebi̇li̇rli̇ği̇ni̇n İncelenmesi̇ an Investigation into the Machinability of Orvar Supreme Hot Work Tool Steel

In this study, machinability tests on Assab Korkmaz Orvar Supreme (1.2344 ESR, AISI H13 Premium) hot work tool steel widely used in industry were carried out. Machinability tests were carried out through single point turning method at eight different cutting speeds (120, 160, 200, 240, 280, 320, 360 ve 400 m/dak), four different feed rates (0,05; 0,10; 0,15 and 0,20 mm/min) and 1 mm depth of cu...

The Effect of Deep Cryogenic Treatment on Microstructure, Hardness and Wear Behavior of INDRA 5 Cold Work Tool Steel

the investigation of the relationship between type a and type b personalities and quality of translation

چکیده ندارد.

investigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem

در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...

Experimental Investigation on Cold-formed Steel Wall Plate System

A series of tests on cold-formed steel (CFS) wall plate system subjected to uplift force at the mid span of the wall plate is presented. The aim of the study was to study the behaviour and identify the modes of failure of CFS wall plate system. Two parameters were considered in these studies: 1) different dimension of U-bracket at the supports and 2) different sizes of lipped Cchannel. The lipp...