Experimental Investigation of Tensile Strength & Micro Hardness Behavior on Aluminium Plate Subjected to GTAW Welding Process
نویسندگان
چکیده
منابع مشابه
Optimization of TIG repair welding process parameters to obtain maximum tensile strength in AZ91C magnesium alloy
In this study, in order to modify the weld structure obtained from repair welding of AZ91C magnesium alloy and improvement of tensile strength, input parameters such as current intensity and preheating temperature were optimized for this alloy. T6 heat treatment was separately done befor and after the welding to homogenize the microstructure and improvement of the mentioned properties. Using va...
متن کاملAn Experimental Study on Effects of Hot Plate Welding Parameters on Toughness Energy and Tensile Strength in Weld Line of Thermoplastic Parts
Integral production of the thermoplastic parts with complicated geometric shapes by the processes such as injection molding and extrusion is not economical. It is better to divide the final shape into more simple parts and after production join them by an appropriate welding process. This research aims to study the tensile strength and toughness energy of high- density polyethylene parts which ...
متن کاملInvestigations on Tensile Strength of Aluminium and Nickel Coated Aluminum
Electro less deposition is an autocatalytic chemical technique to deposit a coating of metal on a work piece with the presence of a reducing agent. Electro less nickel coating has high advantages in electroplating. In this work the changing structure of nickel deposits on aluminum and its alloys at the early stage of electro less nickel deposition using sodium hypophosphite ion used as reducing...
متن کاملEvaluation Of Mechanical Properties Of Dissimilar Metal Tube Welded Joints Using Inert Gas Welding
Evaluation of welding process such as metal inert gas welding and tungsten inert gas arc welding on tensile, bend and hardness properties of austenitic stainless steel SS347H(18Cr 10Ni 1Cb ), T22(21⁄4Cr Mo) and T91(9Cr 1Mo V) grades are studied. Tubes of 54 mm of outer diameter and 4 mm of wall thickness is used as a base material in the following combination SS347H VS T91 and T91 VS T22 is wel...
متن کاملWelding Aluminum Alloy 6061 with Opposing Dual Torch Gtaw Process
Cracking is a major concern in welding aluminum alloys. Although weld solidification cracks can be eliminated through addition of filler alloy, the additives modify the alloy or base-metal constituents and may not always be desirable. High-energy beam processes, such as electron-beam welding, that result in minimal heat input reduce crack sensitivity, but their high cost limits their applicatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2019
ISSN: 2321-9653
DOI: 10.22214/ijraset.2019.6267