Experimental Investigation of Silica Fume based Concrete of M25 Grade
نویسندگان
چکیده
منابع مشابه
Effect of Sodium Chloride on Silica Fume Based M30 Grade Concrete
This paper presents the effect of Sodium Chloride (NaCl) on Conventional Concrete (Silica Fume Based M30 Grade Concrete). The Silica Fume Based M30 Grade Concrete was prepared by adding NaCl concentrations of 0.5,2,4,6,8,10 and 12 g/l i n deionised water. In addition to this, control specimen was prepared with deionised water (without NaCl) for the purpose of co mpari son . The tensile strength...
متن کاملEffects of Silica Fume in Conventional Concrete
The production of tailor made high strength and high performance concrete are made by incorporating silica fume into the normal concrete and it is a routine one in the present days. The mix proportioning is intricate and the design parameters are increased due to the incorporation of silica fume in conventional concrete. The aim of this paper is to look into the different mechanical properties ...
متن کاملInfluence of Silica Fume on Normal Concrete
The incorporation of silica fume into the normal concrete is a routine one in the present days to produce the tailor made high strength and high performance concrete. The design parameters are increasing with the incorporation of silica fume in conventional concrete and the mix proportioning is becoming complex. The main objective of this paper has been made to investigate the different mechani...
متن کاملImproving the workability and strength of silica fume concrete by using silane-treated silica fume
Mortar with high workability even without a water-reducing agent and with high tensile and compressive strengths (3.1 and 78 MPa, respectively) was obtained by using as an admixture silica fume that had been surface treated with a silane coupling agent. The treatment enhanced the wettability of silica fume by water, thereby increasing the workability of the mortar mix. It also enhanced the bond...
متن کاملInfluence of Silica Fume on Chloride Resistance of Concrete
A series of concrete slabs were cast with 0, 7, and 12% by mass silica fume replacement of cement at W/CM = 0.35, 0.40, and 0.45. After either moist or steam curing, a variety of chloride resistance tests were performed. These included AASHTO T259, modified T259, T277, as well as several bulk diffusion tests and sorptivity tests. Results indicate that the use of properly dispersed silica fume r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2020
ISSN: 2321-9653
DOI: 10.22214/ijraset.2020.5237