Experimental Investigation of Natural Convection in Metal Foam-Water
نویسندگان
چکیده
منابع مشابه
Experimental and Numerical Investigations of Natural Convection in Freezing Water
Thermal convection in a lid cooled cavity with phase change was studied experimentally and numerically. The ow and ice front structures, and their dependence on the ow parameters (Rayleigh number) were investigated. In the experiment, the onset of convection in an initially isothermal uid (water) in a 383838mm plexiglas box, which is instantaneously cooled from isothermal top wall to a temperat...
متن کاملExperimental Investigation of Force Convection Heat Transfer in a Car Radiator Filled with SiO2-Water Nanofluid
In this study, effect of adding in SiO2 nanoparticle in base fluid (water) in car radiator is investigated experimentally. Radiators are compact heat exchangers that optimized and evaluated by considering different working conditions. Car\'s cooling system, plays an important role in vehicle\'s performance, consists of two main parts, known as radiator and fan. Radiators are compact heat exchan...
متن کاملMetal Foam and Finned Metal Foam Heat Sinks for Electronics Cooling in Buoyancy-Induced Convection
In this paper, we present our recent experimental results on buoyancy-induced convection in aluminum metal foams of different pore densities [corresponding to 5, 10, 20, and 40 pores per in. (PPI)] and porosities (0.89–0.96). The results show that compared to a heated surface, the heat transfer coefficients in these heat sinks are five to six times higher. However, when compared to commercially...
متن کاملExperimental Investigation on the Effect of Partially Metal Foam inside the Absorber of Parabolic Trough Solar Collector
In the present work the efficiency of a solar parabolic trough has been investigated experimentality. parabolic trough solar collector constitute a proven source of thermal energy for industrial process heat and power genaration. The impact of using the partially porous media in the absorber on the efficiency of PTC (parabolic trough collector) has been investigated. The porosity of copper foa...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Porous Flow
سال: 2016
ISSN: 2164-5639,2164-5663
DOI: 10.12677/apf.2016.61001