Experimental investigation of gas kick effects on dynamic drilling parameters
نویسندگان
چکیده
منابع مشابه
investigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem
در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...
an experimental investigation of the effects of fiber laser percussion drilling: influence of process parameters
this study is focused on investigating the parameters of laser percussion drilling process of nickel-base super alloy inconel 718 with thickness of 1 mm. fiber laser with the power of 500 watts was used as the laser source. laser pulse frequency, duty cycle, laser power, focal point position, were assumed as the laser drilling process variables. the hole geometry features, i.e. entrance hole di...
متن کاملEffects of various drilling parameters on bone during implantology: An in vitro experimental study.
Due to temperature increase during bone drilling, bone necrosis is likely to occur. To minimize bone tissue damage during drilling, a detailed in vitro experimental study by using fresh calf cortical bones has been performed with various combined drilling parameters, such as: drilling environment, drill diameter, drill speed, drill force, feed-rate and drill coating. Bone temperatures at the dr...
متن کاملAn experimental investigation on thermal exposure during bone drilling.
This study presents an experimental investigation of the effects of spindle speed, feed rate, and depth of drilling on the temperature distribution during drilling of the cortical section of the bovine femur. In an effort to reduce measurement uncertainties, a new approach for temperature measurements during bone drilling is presented in this study. The new approach is based on a setup for prec...
متن کاملExperimental Investigation of Process Parameters in drilling operation using different software technique
This research outlines the Taguchi optimization methodology, which is applied to optimize cutting parameters in drilling of glass fiber reinforced composite (GFRC) material. Analysis of variance (ANOVA) is used to study the effect of process parameters on machining process. This procedure eliminates the need for repeated experiments, time and conserves the material by the conventional procedure...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Petroleum Exploration and Production Technology
سال: 2018
ISSN: 2190-0558,2190-0566
DOI: 10.1007/s13202-018-0510-z