Experimental Investigation of Flow Structures Around side-by-side Yawed Cylinders in Shallow Water

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

3D Numerical Simulation of the Separated Turbulent Shallow Flow around a Single Side Obstacle

In this paper, the performance of Reynolds Averaged Navier Stokes (RANS) simulations was evaluated to predict the flow structure developed by the presence of a sidewall obstruction in a uniform open-channel shallow flow. The study of these flow structures is important because they present in several real world configurations, such as groynes in rivers, where the erosion processes, mass transpor...

متن کامل

Phase-Averaged Analysis of Three-Dimensional Vorticity in the Wake of Two Yawed Side-By-Side Circular Cylinders

Thewake flow behind two yawed side-by-sidecircular cylinders is investigated using athree-dimensional vorticity probe. Four yaw angles (α), namely, 0°, 15°, 30° and 45° and twocylinder spacing ratios T of 1.7 and 3.0 were tested. For T = 3.0, there exist two vortex streets and the cylinders behave as independent and isolated ones. The maximum contour value of the coherent streamwise vorticity *...

متن کامل

Computation of Flow Behind Three Side-by-Side Cylinders of Unequal/Equal Spacing

This paper aims to simulate unstable gap flows of three side-by-side cylinders unequally/equally spaced at T1/d = 1.5 and T2/d = 1.6 in a uniform cross flow (Re=300). The simulation is carried out using ANSYS Flotran 7.0. A mesh-independent study is conducted on a single cylinder at Re=100. The Strouhal number and wake flow characteristics compare well with experimental results. Simulation of t...

متن کامل

Shear Localization due to Strain Softening in Side Pressed Cylinders

In this paper, shear localization due to strain softening in sidepressed cylinders, is inverstigated. Shear localization causes formation of macroscopic shear bands which can be obsserved in the metallographic cross-section. In this paper, for the first time a method is presented in which a simple two-slice model is used to study the formation of shear bands. The results obtained form this mode...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Academic Perspective Procedia

سال: 2019

ISSN: 2667-5862

DOI: 10.33793/acperpro.02.03.127