Experimental Investigation of EDM Process Parameters on Aluminum Nano composite using Taguchi Technique
نویسندگان
چکیده
منابع مشابه
Optimization of Edm Process Parameters Using Taguchi Method: a Review
Electrical discharge machining is assessed on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), and Surface Roughness (SR). Process parameters that mostly affected the EDM Process are Pulse on Time, Pulse off Time, Discharge Current, Arc Gap and Duty Cycle. This paper reviews research for the optimization and improvement of various performance parameters measured in the experiment...
متن کاملinvestigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem
در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...
Experimental Investigation on Radial Ball Bearing Parameters Using Taguchi Method
In this work, characteristics of various ball bearing parameters are studied under different loads and rotational speeds. By using Dimensional Analysis (DA), dimensionless parameters are computed which provides solution for a group of parameters. This analysis can be accomplished by using the Buckingham π-theorem. DA leads to reduction of the number of independent parameters involved in a probl...
متن کاملOptimization of CNC Turning Parameters on Aluminum 7015 Hybrid Metal Matrix Composite Using Taguchi Robust Design
-The Aluminum Hybrid Metal Matrix Composites (Al-HMMC) are finding numerous applications in many areas like Automobile, Piston and Cylinder and Aerospace, etc. Adding a third element into the metal matrix composite makes it hybrid. The Reinforcement of SiC and Graphite used in this Al-HMMC improves its strength. The present investigation is to find the optimum machining parameter of CNC turning...
متن کاملExperimental Investigation of Wire-EDM Process Parameters on MRR of Ti-6al-4v Alloy
The objective of the present work was to investigate the effect of the wire electrical discharge machining process parameters on material removal rate of titanium alloy using Taguchi approach. A brass wire of 250μm was applied as a tool electrode to cut the specimen. L36 mixed orthogonal array (2 ×3) has been selected for experimentation under different variables like dielectric conductivity, p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Research Journal on Advanced Science Hub
سال: 2020
ISSN: 2582-4376
DOI: 10.47392/irjash.2020.25