Experimental investigation of asphaltene phase behavior for live crude oil-Precipitation, re-dissolution and molecular weight characteristics-

Investigation of Reversibility of Asphaltene Precipitation and Deposition for an Iranian Crude Oil

In this work, the precipitation and re-dissolution of asphaltenes were studied for an Iranian relatively heavy crude oil. A series of experiments were designed and carried out to quantitatively examine the reversibility of asphaltenes precipitation upon the change in the solvent concentration along with the temperature. n-Heptane was used as the precipitant, and a temperature range of 30 to...

Influence of CO2 Dissolution and Asphaltene Precipitation on Oil PVT and Recovery

investigation of reversibility of asphaltene precipitation and deposition for an iranian crude oil

in this work, the precipitation and re-dissolution of asphaltenes were studied for an iranian relatively heavy crude oil. a series of experiments were designed and carried out to quantitatively examine the reversibility of asphaltenes precipitation upon the change in the solvent concentration along with the temperature. n-heptane was used as the precipitant, and a temperature range of 30 to 70°...

Asphaltene Precipitation in Crude Oils: Theory and Experiments

The precipitation of asphaltenes in two Mexican crude oils was measured using a combination of high-pressure isothermal expansion and atmospheric titration with nalkanes. Experiments were carried out from the liveand tank-oil type of samples of the same crude oils. For the oils investigated, compositional data, precipitation phase diagrams, and bubble point pressures are reported. A theoretical...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...