Experimental investigation in machining EN18 using coated tool under dry and MQL condition

Check Tic-coated Tungsten Carbide Tool Wear in Machining Steel

In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...

Tool Condition Monitoring in Machining - Neural Networks

Condition monitoring and diagnosis systems capable of identifying machining system defects and tiieir location are essential for unmanned machining Unattended (or minimally manned) machining would result in increased capital equipment utilization, thus substantially reducing the manufacturing costs. A review of tool monitoring systems and techniques and their components and the Multiple Princip...

Minimum Quantity Lubrication (MQL) in Machining: Benefits and Drawbacks

Micro lubrication or also known as minimum quantity lubrication (MQL) serves as an alternative to flood cooling by reducing the volume of cutting fluid used in the machining process; but not without significant health concerns. Flood cooling is primarily used to cool and lubricate the cutting tool and work piece interface during machining process. The adverse health effects caused by the use of...

Experimental Investigation on Effect of Cutting Parameters on Surface Roughness and Machining Time in Turning En31 Hardened Steel under Flooded and Mql Conditions

Towards sustainable machining of 17-4 PH stainless steel using hybrid MQL-hot turning process

The use of a minimum quantity of lubrication (MQL) with extremely low consumption of lubricant in machining processes has been reported as a technologically and environmentally feasible alternative to conventional flood cooling. In hot machining, the external heat source is applied during machining that will assist to increase machining performance. Many external heating techniques are availabl...