Experimental Investigation and Mathematical Modelling of Pressure Response for Steam Generator
نویسندگان
چکیده
منابع مشابه
Artificial Intelligence Techniques for Steam Generator Modelling
Inference system out performed the other methods in terms of accuracy and ease of implementation, while still achieving a fast execution time as well as a reasonable training time.
متن کاملMathematical modelling and design of an advanced once-through heat recovery steam generator
The once-through heat recovery steam generator design is ideally matched to very high temperature and pressure, well into the supercritical range. Moreover this type of boiler is structurally simpler than a conventional one, since no drum is required. A specific mathematical model has been developed. Thermodynamic model has been implemented to suit very high pressure (up to 240 bar), suband sup...
متن کاملhydraulic evaluation of low pressure drip irrigation systems using mathematical modelling and experimental data
in the present study, hydraulic properties of low pressure drip irrigation systems in lateral pipes were evaluated by mathematical model with the aid of experimental data resulting from testing of tubes available in iran. in this regard, emitters discharge were measured in different initial heads from 0.45 to 1.8 m for laterals with outside diameter of 32 mm with different lengths of 89, 60, 30...
متن کاملReconfiguration of an industrial steam generator using bond graph modelling
In this paper, we survey some recent advances made in the field of bond graph modelling and show that bond graph modelling method is well suited to solve modelling, fault diagnosis and fault tolerant control problems in complex process engineering systems. We present a case study of development and implementation of fault tolerant control scheme for a steam generator process. Steam generator is...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Engineering & Technology
سال: 2018
ISSN: 2227-524X
DOI: 10.14419/ijet.v7i4.19.28077